| From: |
| Fenglin Wu via B4 Relay <devnull+quic_fenglinw.quicinc.com-AT-kernel.org> |
| To: |
| Andy Gross <agross-AT-kernel.org>, Bjorn Andersson <andersson-AT-kernel.org>, Konrad Dybcio <konrad.dybcio-AT-linaro.org>, Liam Girdwood <lgirdwood-AT-gmail.com>, Mark Brown <broonie-AT-kernel.org>, Rob Herring <robh+dt-AT-kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt-AT-linaro.org>, Conor Dooley <conor+dt-AT-kernel.org>, kernel-AT-quicinc.com |
| Subject: |
| [PATCH 0/4] Add pm8010 RPMH regulators for sm8550 boards |
| Date: |
| Mon, 11 Dec 2023 11:16:58 +0800 |
| Message-ID: |
| <20231211-pm8010-regulator-v1-0-571e05fb4ecc@quicinc.com> |
| Cc: |
| Krzysztof Kozlowski <krzysztof.kozlowski-AT-linaro.org>, linux-arm-msm-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, quic_collinsd-AT-quicinc.com, quic_subbaram-AT-quicinc.com, quic_jprakash-AT-quicinc.com, Fenglin Wu <quic_fenglinw-AT-quicinc.com> |
| Archive-link: |
| Article |
There are 2 PM8010 PMICs present in sm8550-mtp/sm8550-qrd boards and
each of them exposes 7 LDOs. Add RPMH regulator support for them.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
Fenglin Wu (4):
regulator: qcom-rpmh: extend to support multiple linear voltage ranges
regulator: qcom,rpmh: add compatible for pm8010 RPMH regultor
regulator: qcom-rpmh: add support for pm8010 regulators
arm64: dts: qcom: Add pm8010 regulators for sm8550 boards
.../bindings/regulator/qcom,rpmh-regulator.yaml | 14 ++
arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 120 ++++++++++++++
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 120 ++++++++++++++
drivers/regulator/qcom-rpmh-regulator.c | 177 ++++++++++++++++++---
4 files changed, 405 insertions(+), 26 deletions(-)
---
base-commit: 753e4d5c433da57da75dd4c3e1aececc8e874a62
change-id: 20231205-pm8010-regulator-0348cb19087a
Best regards,
--
Fenglin Wu <quic_fenglinw@quicinc.com>
