| From: |
| Claudiu <claudiu.beznea-AT-tuxon.dev> |
| To: |
| s.shtylyov-AT-omp.ru, davem-AT-davemloft.net, edumazet-AT-google.com, kuba-AT-kernel.org, pabeni-AT-redhat.com, robh+dt-AT-kernel.org, krzysztof.kozlowski+dt-AT-linaro.org, conor+dt-AT-kernel.org, geert+renesas-AT-glider.be, magnus.damm-AT-gmail.com, mturquette-AT-baylibre.com, sboyd-AT-kernel.org, linus.walleij-AT-linaro.org, prabhakar.mahadev-lad.rj-AT-bp.renesas.com, biju.das.jz-AT-bp.renesas.com |
| Subject: |
| [PATCH v2 00/11] renesas: rzg3s: Add support for Ethernet |
| Date: |
| Thu, 07 Dec 2023 09:06:49 +0200 |
| Message-ID: |
| <20231207070700.4156557-1-claudiu.beznea.uj@bp.renesas.com> |
| Cc: |
| linux-renesas-soc-AT-vger.kernel.org, netdev-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-clk-AT-vger.kernel.org, linux-gpio-AT-vger.kernel.org, Claudiu Beznea <claudiu.beznea.uj-AT-bp.renesas.com> |
| Archive-link: |
| Article |
From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Hi,
Series adds Ethernet support for Renesas RZ/G3S.
Along with it preparatory cleanups and fixes were included.
Patches 1-2 are clock specific.
Patches 3-7 are pinctrl specific.
Patches 8-11 are device tree specific.
It is expected that patches will be integrated though Geert's tree.
Thank you,
Claudiu Beznea
Changes in v2:
- patches 1/14 and 14/14 from v1 were integrated thus, didn't include
them in this version
- dropped patch 3/14 "clk: renesas: rzg2l-cpg: Add support for MSTOP"
from v1 and associated changes; a follow up will be done on it after
the current series will be accepted
- addressed review comments
- fixed typos in commit title and description
- collected tags
- removed IEN functinality form patch 6/12 and added it in a separate patch
(patch 7/12)
- patch 11/14] "arm64: renesas: rzg3s-smarc-som: Invert the logic for
SW_SD2_EN macro from" from v1 was replaced by patch 10/11 in this
version "arm64: renesas: rzg3s-smarc-som: Use switches' names
to select on-board functionalities"
Claudiu Beznea (11):
clk: renesas: rzg2l-cpg: Check reset monitor registers
clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and
ETH1
pinctrl: renesas: rzg2l: Move arg and index in the main function block
pinctrl: renesas: rzg2l: Add pin configuration support for pinmux
groups
pinctrl: renesas: rzg2l: Add support to select power source for
Ethernet pins
pinctrl: renesas: rzg2l: Add output enable support
pinctrl: renesas: rzg2l: Add input enable to the Ethernet pins
dt-bindings: net: renesas,etheravb: Document RZ/G3S support
arm64: renesas: r9a08g045: Add the Ethernet nodes
arm64: renesas: rzg3s-smarc-som: Use switches' names to select
on-board functionalities
arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfaces
.../bindings/net/renesas,etheravb.yaml | 1 +
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 38 ++++
.../boot/dts/renesas/rzg3s-smarc-som.dtsi | 173 ++++++++++++++++--
drivers/clk/renesas/r9a08g045-cpg.c | 10 +
drivers/clk/renesas/rzg2l-cpg.c | 59 ++++--
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 164 +++++++++++++++--
6 files changed, 398 insertions(+), 47 deletions(-)
--
2.39.2
