| From: |
| Asmaa Mnebhi <asmaa-AT-nvidia.com> |
| To: |
| <andy.shevchenko-AT-gmail.com>, <linus.walleij-AT-linaro.org>, <bgolaszewski-AT-baylibre.com>, <linux-gpio-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <linux-acpi-AT-vger.kernel.org> |
| Subject: |
| [PATCH v5 0/2] Support Nvidia BlueField-3 GPIO driver and pin controller |
| Date: |
| Tue, 14 Mar 2023 18:16:07 -0400 |
| Message-ID: |
| <20230314221609.22433-1-asmaa@nvidia.com> |
| Cc: |
| Asmaa Mnebhi <asmaa-AT-nvidia.com> |
| Archive-link: |
| Article |
Support the BlueField-3 SoC GPIO driver for handling interrupts and
providing the option to change the direction and value of a GPIO.
Support the BlueField-3 SoC pin controller driver for allowing a
select number of GPIO pins to be manipulated from userspace or
the kernel.
The gpio-mlxbf3.c driver handles hardware registers and logic
that are different from gpio-mlxbf.c and gpio-mlxbf2.c.
For that reason, we have separate drivers for each generation.
Changes from v4->v5:
gpio-mlxbf3.c:
- Update Kconfig dependency in gpio
- remove version.h header
- use irq_hw_number_t
- release lock in mlxbf3_gpio_irq_set_type
- add IRQCHIP_IMMUTABLE and GPIOCHIP_IRQ_RESOURCE_HELPERS
- remove npins property to use ngpios instead
- Assign handle_bad_irq() in probe
- Use handle_edge_irq instead
pinctrl-mlxbf3.c:
- change the driver name to pinctrl-mlxbf3
- alignment cleanup
- use PINCTRL_PINFUNCTION
- use pinctrl_add_gpio_ranges
- use devm_platform_ioremap_resource
Asmaa Mnebhi (2):
gpio: gpio-mlxbf3: Add gpio driver support
pinctrl: pinctrl-mlxbf: Add pinctrl driver support
drivers/gpio/Kconfig | 13 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mlxbf3.c | 245 ++++++++++++++++++++++++
drivers/pinctrl/Kconfig | 13 ++
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-mlxbf3.c | 318 +++++++++++++++++++++++++++++++
6 files changed, 591 insertions(+)
create mode 100644 drivers/gpio/gpio-mlxbf3.c
create mode 100644 drivers/pinctrl/pinctrl-mlxbf3.c
--
2.30.1
