| From: |
| Wen Gong <quic_wgong-AT-quicinc.com> |
| To: |
| <ath11k-AT-lists.infradead.org> |
| Subject: |
| [PATCH v3 00/15] wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP |
| Date: |
| Tue, 13 Sep 2022 01:15:03 -0400 |
| Message-ID: |
| <20220913051518.23051-1-quic_wgong@quicinc.com> |
| Cc: |
| <linux-wireless-AT-vger.kernel.org>, <quic_wgong-AT-quicinc.com> |
| Archive-link: |
| Article |
v3:
1. added "ath11k: fix a possible dead lock caused by ab->base_lock".
3. deleted "ath11k: add support for extended wmi service bit" which is alreay upstream.
v2:
1. change some minor comments by Kalle.
2. rebased to ath.git ath-202112220603
Depends on one patch:
[v5] cfg80211: save power spectral density(psd) of regulatory rule
https://patchwork.kernel.org/project/linux-wireless/patch...
It introduced some new concept:
power type of AP(STANDARD_POWER_AP, INDOOR_AP, VERY_LOW_POWER_AP)
power type of STATION(DEFAULT_CLIENT, SUBORDINATE_CLIENT)
power spectral density(psd)
This patchset is to implement the new rules for 6 GHz band in
ath11k.
ath11k parsed the reg rules from new wmi event
WMI_REG_CHAN_LIST_CC_EXT_EVENTID and parse the
transmit power envelope element in beacon of AP
and then set new wmi cmd WMI_VDEV_SET_TPC_POWER_CMDID
to firmware when connect to 6G AP, also support backward
compatibility with firmware which not support new wmi
cmd WMI_VDEV_SET_TPC_POWER_CMDID.
Baochen Qiang (1):
wifi: ath11k: fix a possible dead lock caused by ab->base_lock
Wen Gong (14):
wifi: ath11k: Add support to parse new wmi event for 6 GHz regulatory
wifi: ath11k: add support to select 6 GHz Regulatory type
wifi: ath11k: allow only one interface up simultaneously for WCN6855
wifi: ath11k: store cur_regulatory_info for each radio
wifi: ath11k: update regulatory rules when interface added
wifi: ath11k: update regulatory rules when connect to AP on 6 GHz band
for station
wifi: ath11k: save power spectral density(psd) of regulatory rule
wifi: ath11k: add parse of transmit power envelope element
wifi: ath11k: save max tx power in vdev start response event from
firmware
wifi: ath11k: fill parameters for vdev_set_tpc_power wmi command
wifi: ath11k: add WMI_TLV_SERVICE_EXT_TPC_REG_SUPPORT service bit
wifi: ath11k: discard BSS_CHANGED_TXPOWER when EXT_TPC_REG_SUPPORT for
6 GHz
wifi: ath11k: add handler for WMI_VDEV_SET_TPC_POWER_CMDID
wifi: ath11k: send TPC power to firmware for 6 GHz station
drivers/net/wireless/ath/ath11k/core.c | 6 +
drivers/net/wireless/ath/ath11k/core.h | 40 ++
drivers/net/wireless/ath/ath11k/hw.c | 17 +
drivers/net/wireless/ath/ath11k/hw.h | 5 +
drivers/net/wireless/ath/ath11k/mac.c | 539 +++++++++++++++++-
drivers/net/wireless/ath/ath11k/mac.h | 5 +-
drivers/net/wireless/ath/ath11k/reg.c | 105 +++-
drivers/net/wireless/ath/ath11k/reg.h | 6 +-
drivers/net/wireless/ath/ath11k/wmi.c | 728 +++++++++++++++++++++++--
drivers/net/wireless/ath/ath11k/wmi.h | 210 +++++++
10 files changed, 1608 insertions(+), 53 deletions(-)
base-commit: e5da5e8c54e27d8fa86765cd733c1a05aee53ae9
prerequisite-patch-id: d0941cb1e08f82e9bd5feaf01b160807b4b0faa9
prerequisite-patch-id: 8ed14a45e891683ebc28d3fe1c9405430561b09f
--
2.31.1
