| From: |
| Benjamin Mugnier <benjamin.mugnier-AT-foss.st.com> |
| To: |
| <linux-media-AT-vger.kernel.org> |
| Subject: |
| [PATCH 0/2] media: Add ST VGXY61 camera sensor driver |
| Date: |
| Thu, 10 Mar 2022 14:32:53 +0100 |
| Message-ID: |
| <20220310133255.1946530-1-benjamin.mugnier@foss.st.com> |
| Cc: |
| <alain.volmat-AT-foss.st.com>, <hugues.fruchet-AT-foss.st.com>, <sylvain.petinot-AT-foss.st.com>, Benjamin Mugnier <benjamin.mugnier-AT-foss.st.com> |
| Archive-link: |
| Article |
Hello,
This series adds a driver for the ST VGXY61 camera sensor. This camera sensor is using the i2c bus
for control and the csi-2 bus for data.
Tested on DragonBoard 410c and on Raspberry Pi 4. DT bindings are in 1/2, and the driver in
2/2.
Benjamin Mugnier (2):
media: dt-bindings: media: i2c: Add ST VGXY61 camera sensor binding
media: i2c: Add driver for ST VGXY61 camera sensor
.../bindings/media/i2c/st,st-vgxy61.yaml | 134 ++
MAINTAINERS | 10 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/st-vgxy61.c | 1919 +++++++++++++++++
5 files changed, 2075 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
create mode 100644 drivers/media/i2c/st-vgxy61.c
--
2.25.1
