Add support for Hikey 970 PCIe
From: | Mauro Carvalho Chehab <mchehab+huawei-AT-kernel.org> | |
To: | Vinod Koul <vkoul-AT-kernel.org>, Bjorn Helgaas <bhelgaas-AT-google.com> | |
Subject: | [PATCH v9 00/11] Add support for Hikey 970 PCIe | |
Date: | Wed, 04 Aug 2021 18:02:56 +0200 | |
Message-ID: | <cover.1628092716.git.mchehab+huawei@kernel.org> | |
Cc: | linuxarm-AT-huawei.com, mauro.chehab-AT-huawei.com, Mauro Carvalho Chehab <mchehab+huawei-AT-kernel.org>, Rob Herring <robh-AT-kernel.org>, Krzysztof WilczyĆski <kw-AT-linux.com>, Binghui Wang <wangbinghui-AT-hisilicon.com>, Xiaowei Song <songxiaowei-AT-hisilicon.com>, linux-kernel-AT-vger.kernel.org, linux-pci-AT-vger.kernel.org, linux-phy-AT-lists.infradead.org | |
Archive-link: | Article |
The DT schema used by this series got merged at: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linu... The series should apply cleanly on the top of v5.14-rc1. patch1 contains a PHY for Kirin 970 PCIe. The remaining patches add support for Kirin 970 at the pcie-kirin driver, and add the needed logic to compile it as module and to allow to dynamically remove the driver in runtime. Tested on HiKey970: # lspci -D -PP 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01) 0000:00:00.0/01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba) 0000:00:00.0/01:00.0/02:01.0/03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a809 0000:00:00.0/01:00.0/02:07.0/06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Tested on HiKey960: # lspci -D 0000:00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01) --- v9: - Did some cleanups at patches 1 and 5 Mauro Carvalho Chehab (11): phy: HiSilicon: Add driver for Kirin 970 PCIe PHY PCI: kirin: Reorganize the PHY logic inside the driver PCI: kirin: Add support for a PHY layer PCI: kirin: Use regmap for APB registers PCI: kirin: Add support for bridge slot DT schema PCI: kirin: Add Kirin 970 compatible PCI: kirin: Add MODULE_* macros PCI: kirin: Allow building it as a module PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: fix poweroff sequence PCI: kirin: Allow removing the driver drivers/pci/controller/dwc/Kconfig | 2 +- drivers/pci/controller/dwc/pcie-kirin.c | 646 ++++++++++++++----- drivers/phy/hisilicon/Kconfig | 10 + drivers/phy/hisilicon/Makefile | 1 + drivers/phy/hisilicon/phy-hi3670-pcie.c | 801 ++++++++++++++++++++++++ 5 files changed, 1312 insertions(+), 148 deletions(-) create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c -- 2.31.1