Add clock drivers for SM8350

This adds gcc clock controller drivers for the controller found
in SM8350 SoC

Changes in v4:
 - Add Ack from Rob on binding
 - modularize alpha_pll_trion_set_rate()

Changes in v3:
 - Drop rpmh clk patches applied
 - Add a new patch to replace regval with val as suggested by Stephen
 - Fix comments for new Lucid 5LPE PLL: sort new defines by BIT numbers, fix
   comments, use alpha_pll_check_rate_margin(), rework
   clk_lucid_5lpe_pll_postdiv_set_rate() logic
 - Add power domains and optional clocks in bindings
 - Fix comments for gcc sm8350 driver: clean includes used, use only
   .fw_name for clocks defined in DT, use floor ops for sdcc clocks, remove
   critical clocks and enable them in probe, add comments for clks using
   BRANCH_HALT_SKIP and BRANCH_HALT_DELAY

Changes in v2:
 - Add r-b from Bjorn
 - Add the gcc_qupv3_wrap_1_{m|s}_ahb_clk and gcc_qupv3_wrap1_s5_clk

Vinod Koul (3):
  clk: qcom: clk-alpha-pll: replace regval with val
  clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate()
  dt-bindings: clock: Add SM8350 GCC clock bindings

Vivek Aknurwar (2):
  clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
  clk: qcom: gcc: Add clock driver for SM8350

 .../bindings/clock/qcom,gcc-sm8350.yaml       |   96 +
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/clk-alpha-pll.c              |  209 +-
 drivers/clk/qcom/clk-alpha-pll.h              |    4 +
 drivers/clk/qcom/gcc-sm8350.c                 | 3790 +++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8350.h   |  261 ++
 7 files changed, 4353 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
 create mode 100644 drivers/clk/qcom/gcc-sm8350.c
 create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8350.h

-- 
2.26.2