| From: |
| Dongchun Zhu <dongchun.zhu-AT-mediatek.com> |
| To: |
| <mchehab-AT-kernel.org>, <andriy.shevchenko-AT-linux.intel.com>, <robh+dt-AT-kernel.org>, <mark.rutland-AT-arm.com>, <sakari.ailus-AT-linux.intel.com>, <drinkcat-AT-chromium.org>, <tfiga-AT-chromium.org>, <matthias.bgg-AT-gmail.com>, <bingbu.cao-AT-intel.com> |
| Subject: |
| [PATCH v14 0/2] media: i2c: Add support for OV02A10 sensor |
| Date: |
| Wed, 2 Sep 2020 20:01:20 +0800 |
| Message-ID: |
| <20200902120122.24456-1-dongchun.zhu@mediatek.com> |
| Cc: |
| <srv_heupstream-AT-mediatek.com>, <linux-mediatek-AT-lists.infradead.org>, <linux-arm-kernel-AT-lists.infradead.org>, <sj.huang-AT-mediatek.com>, <linux-media-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <louis.kuo-AT-mediatek.com>, <shengnan.wang-AT-mediatek.com>, <dongchun.zhu-AT-mediatek.com> |
| Archive-link: |
| Article |
Hello,
This series adds YAML DT binding and V4L2 sub-device driver for Omnivision's
OV02A10 2-megapixel 10-bit RAW CMOS 1/5" sensor, which has a single MIPI lane
interface and uses the I2C bus for control and the CSI-2 bus for data.
The driver is implemented with V4L2 framework.
- Async registered as a V4L2 sub-device.
- As the first component of camera system including Seninf, ISP pipeline.
- A media entity that provides one source pad in common and two for dual-cam.
Also this driver supports following features:
- Manual exposure and analog gain control support
- Vertical blanking control support
- Test pattern support
- Media controller support
- Runtime PM support
- Support resolution: 1600x1200 at 30FPS
Previous versions of this patch-set can be found here:
v13: https://lore.kernel.org/linux-media/20200710101850.4604-1...
v12: https://lore.kernel.org/linux-media/20200702115223.21507-...
v11: https://lore.kernel.org/linux-media/20200630024942.20891-...
v10: https://lore.kernel.org/linux-media/20200615122937.18965-...
v09: https://lore.kernel.org/linux-media/20200523084103.31276-...
v08: https://lore.kernel.org/linux-media/20200509080627.23222-...
v07: https://lore.kernel.org/linux-media/20200430080924.1140-1...
v06: https://lore.kernel.org/linux-media/20191211112849.16705-...
v05: https://lore.kernel.org/linux-media/20191104105713.24311-...
v04: https://lore.kernel.org/linux-media/20190907092728.23897-...
v03: https://lore.kernel.org/linux-media/20190819034331.13098-...
v02: https://lore.kernel.org/linux-media/20190704084651.3105-1...
v01: https://lore.kernel.org/linux-media/20190523102204.24112-...
Changes of v14 mainly address comments from Tomasz and Sakari.
Compared to v13:
- Fix imperfections in DT
- Use an array property "ovti,mipi-clock-voltage" to indicate MIPI TX speed
- Add the handler to the optional property "ovti,mipi-clock-voltage" in driver
Please help to review this patch.
Thanks.
Dongchun Zhu (2):
media: dt-bindings: media: i2c: Document OV02A10 bindings
media: i2c: Add OV02A10 image sensor driver
.../bindings/media/i2c/ovti,ov02a10.yaml | 161 +++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov02a10.c | 1083 ++++++++++++++++++++
5 files changed, 1266 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
create mode 100644 drivers/media/i2c/ov02a10.c
--
2.9.2
