| From: |
| Chris Packham <chris.packham-AT-alliedtelesis.co.nz> |
| To: |
| linus.walleij-AT-linaro.org, bgolaszewski-AT-baylibre.com, robh+dt-AT-kernel.org, mark.rutland-AT-arm.com, rjui-AT-broadcom.com, sbranden-AT-broadcom.com, bcm-kernel-feedback-list-AT-broadcom.com, f.fainelli-AT-gmail.com, richard.laing-AT-alliedtelesis.co.nz |
| Subject: |
| [PATCH 0/2] gpio: brcm: XGS iProc GPIO driver |
| Date: |
| Fri, 4 Oct 2019 14:25:23 +1300 |
| Message-ID: |
| <20191004012525.26647-1-chris.packham@alliedtelesis.co.nz> |
| Cc: |
| linux-gpio-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-arm-kernel-AT-lists.infradead.org, linux-kernel-AT-vger.kernel.org, Chris Packham <chris.packham-AT-alliedtelesis.co.nz> |
| Archive-link: |
| Article |
This is ported this from Broadcom's XLDK. There seem to be 3 different
IP blocks for 3 separate banks of GPIOs in the iProc chips.
I've dropped everything except support for the Chip Common A GPIO
controller because the other blocks actually seem to be supportable with
other drivers. The driver itself is halfway between pinctrl-nsp-gpio.c
and pinctrl-iproc-gpio.c.
Chris Packham (2):
dt-bindings: gpio: brcm: Add bindings for xgs-iproc
gpio: Add xgs-iproc driver
.../bindings/gpio/brcm,xgs-iproc.txt | 41 ++
drivers/gpio/Kconfig | 9 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-xgs-iproc.c | 422 ++++++++++++++++++
4 files changed, 473 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc.txt
create mode 100644 drivers/gpio/gpio-xgs-iproc.c
--
2.23.0
