| From: |
| Chunfeng Yun <chunfeng.yun-AT-mediatek.com> |
| To: |
| Rob Herring <robh+dt-AT-kernel.org>, Greg Kroah-Hartman <gregkh-AT-linuxfoundation.org>, Heikki Krogerus <heikki.krogerus-AT-linux.intel.com> |
| Subject: |
| [v3 PATCH 0/6] add USB Type-B GPIO connector driver |
| Date: |
| Wed, 3 Apr 2019 10:09:08 +0800 |
| Message-ID: |
| <1554257354-7440-1-git-send-email-chunfeng.yun@mediatek.com> |
| Cc: |
| Mark Rutland <mark.rutland-AT-arm.com>, Chunfeng Yun <chunfeng.yun-AT-mediatek.com>, Matthias Brugger <matthias.bgg-AT-gmail.com>, Adam Thomson <Adam.Thomson.Opensource-AT-diasemi.com>, Li Jun <jun.li-AT-nxp.com>, Badhri Jagan Sridharan <badhri-AT-google.com>, Hans de Goede <hdegoede-AT-redhat.com>, Andy Shevchenko <andy.shevchenko-AT-gmail.com>, Min Guo <min.guo-AT-mediatek.com>, Alan Stern <stern-AT-rowland.harvard.edu>, <devicetree-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <linux-usb-AT-vger.kernel.org>, <linux-arm-kernel-AT-lists.infradead.org>, <linux-mediatek-AT-lists.infradead.org> |
| Archive-link: |
| Article |
Because the USB Connector is introduced and the requirement of
usb-connector.txt binding, the old way using extcon to support
USB Dual-Role switch is now deprecated, meanwhile there is no
available common driver when use Type-B connector, typically
using an input GPIO to detect USB ID pin.
This patch series introduce a Type-B GPIO connector driver and try
to replace the function provided by extcon-usb-gpio driver.
v3 changes:
1. add GPIO direction, and use fixed-regulator for GPIO controlled
VBUS regulator suggested by Rob;
2. rebuild fwnode_usb_role_switch_get() suggested by Andy and Heikki
3. treat the type-B connector as a virtual device;
4. change file name of driver again
5. select USB_ROLE_SWITCH in mtu3/Kconfig suggested by Heikki
6. rename ssusb_mode_manual_switch() to ssusb_mode_switch()
v2 changes:
1. make binding clear, and add a extra compatible suggested by Hans
Chunfeng Yun (6):
dt-bindings: connector: add optional properties for Type-B
dt-bindings: usb: add binding for Type-B GPIO connector driver
dt-bindings: usb: mtu3: add properties about USB Role Switch
usb: roles: add API to get usb_role_switch by node
usb: roles: add USB Type-B GPIO connector driver
usb: mtu3: register a USB Role Switch for dual role mode
.../bindings/connector/usb-connector.txt | 14 +
.../devicetree/bindings/usb/mediatek,mtu3.txt | 10 +-
.../bindings/usb/typeb-conn-gpio.txt | 49 +++
drivers/usb/mtu3/Kconfig | 1 +
drivers/usb/mtu3/mtu3.h | 5 +
drivers/usb/mtu3/mtu3_debugfs.c | 4 +-
drivers/usb/mtu3/mtu3_dr.c | 47 ++-
drivers/usb/mtu3/mtu3_dr.h | 6 +-
drivers/usb/mtu3/mtu3_plat.c | 3 +-
drivers/usb/roles/Kconfig | 11 +
drivers/usb/roles/Makefile | 1 +
drivers/usb/roles/class.c | 31 ++
drivers/usb/roles/typeb-conn-gpio.c | 301 ++++++++++++++++++
include/linux/usb/role.h | 2 +
14 files changed, 476 insertions(+), 9 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/typeb-conn-gpio.txt
create mode 100644 drivers/usb/roles/typeb-conn-gpio.c
--
2.20.1
