| From: |
| Ray Jui <ray.jui-AT-broadcom.com> |
| To: |
| Kishon Vijay Abraham I <kishon-AT-ti.com>, Rob Herring <robh+dt-AT-kernel.org>, Mark Rutland <mark.rutland-AT-arm.com> |
| Subject: |
| [PATCH v3 0/2] Add Broadcom Stingray PCIe PHY support |
| Date: |
| Wed, 4 Jul 2018 11:22:11 -0700 |
| Message-ID: |
| <1530728533-28770-1-git-send-email-ray.jui@broadcom.com> |
| Cc: |
| linux-kernel-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, bcm-kernel-feedback-list-AT-broadcom.com, Ray Jui <ray.jui-AT-broadcom.com> |
| Archive-link: |
| Article |
This patch series adds PCIe PHY support for both PAXB and PAXC root complex in
Broadcom Stingray SOC
This patch series is based off v4.18-rc3 and is available on GIHUB:
repo: https://github.com/Broadcom/arm64-linux.git
branch: sr-pcie-phy-v3
Changes since v2:
- Add 'reg' property to the driver so it can access the PCIe SS PHY block
- Rebase to v4.18-rc3
Changes since v1:
- Rebase from v4.17-rc5 to v4.18-rc1
Ray Jui (2):
dt-bindings: phy: Add binding doc for Stingray PCIe PHY
phy: bcm-sr-pcie: Add Stingray PCIe PHY driver
.../devicetree/bindings/phy/brcm,sr-pcie-phy.txt | 41 +++
drivers/phy/broadcom/Kconfig | 10 +
drivers/phy/broadcom/Makefile | 2 +
drivers/phy/broadcom/phy-bcm-sr-pcie.c | 327 +++++++++++++++++++++
4 files changed, 380 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,sr-pcie-phy.txt
create mode 100644 drivers/phy/broadcom/phy-bcm-sr-pcie.c
--
2.1.4
