| From: |
| Tomer Maimon <tmaimon77-AT-gmail.com> |
| To: |
| robh+dt-AT-kernel.org, mark.rutland-AT-arm.com, jdelvare-AT-suse.com, linux-AT-roeck-us.net, avifishman70-AT-gmail.com, yuenn-AT-google.com, brendanhiggins-AT-google.com, venture-AT-google.com, joel-AT-jms.id.au |
| Subject: |
| [PATCH v1 0/2] hwmon: Add NPCM7xx PWM driver support |
| Date: |
| Tue, 29 May 2018 13:02:19 +0300 |
| Message-ID: |
| <1527588141-18639-1-git-send-email-tmaimon77@gmail.com> |
| Cc: |
| devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-hwmon-AT-vger.kernel.org, openbmc-AT-lists.ozlabs.org, Tomer Maimon <tmaimon77-AT-gmail.com> |
| Archive-link: |
| Article |
This patch set adds Pulse Width Modulation (PWM) support
for the Nuvoton NPCM7xx Baseboard Management Controller (BMC).
The NPCM7xx PWM controller can support 8 PWM output ports.
The hwmon driver provides sysfs entries through which the user can
configure and get the duty cycle between 0 (disable the specific PWM)
to 255 of particular PWM output port.
The NPCM7xx PWM driver tested on NPCM750 evaluation board.
Tomer Maimon (2):
dt-binding: hwmon: Add NPCM7xx PWM documentation
hwmon: npcm-pwm: add NPCM7xx PWM driver
.../devicetree/bindings/hwmon/npcm7xx-pwm.txt | 25 ++
drivers/hwmon/Kconfig | 6 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/npcm7xx-pwm.c | 363 +++++++++++++++++++++
4 files changed, 395 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/npcm7xx-pwm.txt
create mode 100644 drivers/hwmon/npcm7xx-pwm.c
--
2.14.1
