| From: |
| Elaine Zhang <zhangqing-AT-rock-chips.com> |
| To: |
| lee.jones-AT-linaro.org, lgirdwood-AT-gmail.com, broonie-AT-kernel.org |
| Subject: |
| [PATCH v3 0/5] rk808: Add RK805 support |
| Date: |
| Thu, 16 Mar 2017 10:14:59 +0800 |
| Message-ID: |
| <1489630504-11328-1-git-send-email-zhangqing@rock-chips.com> |
| Cc: |
| huangtao-AT-rock-chips.com, xxx-AT-rock-chips.com, linux-rockchip-AT-lists.infradead.org, linux-kernel-AT-vger.kernel.org, chenjh-AT-rock-chips.com, robh+dt-AT-kernel.org, mark.rutland-AT-arm.com, devicetree-AT-vger.kernel.org, w.egorov-AT-phytec.de, Elaine Zhang <zhangqing-AT-rock-chips.com> |
change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
use pm_shutdown_prepare_fn to prepare shutdown
and pm_pwroff_fn pull down gpio to shut down rk805
it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3
change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document
Elaine Zhang (5):
mfd: rk808: fix up the chip id get failed
linux: mfd: rk808: add rk805 regs addr and ID
regulator: rk808: Add regulator driver for RK805
mfd: rk808: Add RK805 support
mfd: dt-bindings: Add RK805 device tree bindings document
Documentation/devicetree/bindings/mfd/rk808.txt | 20 +++-
drivers/clk/Kconfig | 4 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 143 +++++++++++++++++++++++-
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 130 +++++++++++++++++++++
drivers/rtc/Kconfig | 4 +-
include/linux/mfd/rk808.h | 120 ++++++++++++++++++++
8 files changed, 414 insertions(+), 15 deletions(-)
--
1.9.1
