| From: |
| Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> |
| To: |
| linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, laurent.pinchart@ideasonboard.com |
| Subject: |
| [PATCH] [media] rcar-csi2: add Renesas R-Car MIPI CSI-2 driver |
| Date: |
| Mon, 27 Jun 2016 19:45:32 +0200 |
| Message-ID: |
| <20160627174533.16029-1-niklas.soderlund+renesas@ragnatech.se> |
| Cc: |
| ulrich.hecht+renesas@gmail.com, hans.verkuil@cisco.com, =?UTF-8?q?Niklas=20S=C3=B6derlund?= <niklas.soderlund+renesas@ragnatech.se> |
| Archive‑link: | |
Article |
Hi all,
This patch adds support for the R-Car MIPI CSI-2 driver.
It is based on top of the media_tree and depends on the series '[PATCH
0/2] move s_stream from v4l2_subdev_video_ops to move s_stream from
v4l2_subdev_pad_ops'. It's tested on a Renesas Salvator-X board.
The patch itself do not need a pad argument for s_stream but it is
tested on a Renesas Salvator-X which have a ADV7482 device in the video
input pipeline (RFC for that driver previously posted) which needs the
pad argument.
If anyone is interested to test on Salvator-X the following branch
contains all the patches to grab video (rcar-vin for Gen3, rcar-cis2 and
adv7482).
https://git.ragnatech.se/linux rcar-vin-gen3
Niklas Söderlund (1):
[media] rcar-csi2: add Renesas R-Car MIPI CSI-2 driver
.../devicetree/bindings/media/rcar-csi2.txt | 79 +++
drivers/media/platform/rcar-vin/Kconfig | 11 +
drivers/media/platform/rcar-vin/Makefile | 2 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 545 +++++++++++++++++++++
4 files changed, 637 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
--
2.8.3
