| From: |
| Zhiqiang Hou <B48286@freescale.com> |
| To: |
| <linux-arm-kernel@lists.infradead.org>, <catalin.marinas@arm.com>, <will.deacon@arm.com>, <linux-i2c@vger.kernel.org>, <linux-watchdog@vger.kernel.org>, <linux-doc@vger.kernel.org>, <linux-clk@vger.kernel.org> |
| Subject: |
| [PATCH V5 1/6] i2c: Add i2c support to Freescale Layerscape platforms |
| Date: |
| Mon, 19 Oct 2015 19:56:09 +0800 |
| Message-ID: |
| <1445255774-32887-1-git-send-email-B48286@freescale.com> |
| Cc: |
| <mark.rutland@arm.com>, <linux@roeck-us.net>, <wsa@the-dreams.de>, <wim@iguana.be>, <corbet@lwn.net>, <mturquette@baylibre.com>, <sboyd@codeaurora.org>, <Mingkai.Hu@freescale.com>, <Shaohui.Xie@freescale.com>, <scottwood@freescale.com>, <bhupesh.sharma@freescale.com>, <Wenbin.Song@freescale.com>, <B48286@freescale.com> |
| Archive‑link: | |
Article |
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Modify the I2C_IMX config to support to Layerscape platforms.
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
---
V5: V4 V3 V2
- No change.
drivers/i2c/busses/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 08b8617..14147ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -582,10 +582,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC processors.
+ the Freescale i.MX/MXC or Layerscape processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
--
2.1.0.27.g96db324
