| From: |
| Antheas Kapenekakis <lkml-AT-antheas.dev> |
| To: |
| platform-driver-x86-AT-vger.kernel.org |
| Subject: |
| [PATCH v1 00/10] platform/x86: msi-wmi-platform: Add fan curves/platform profile/tdp/battery limiting |
| Date: |
| Sun, 11 May 2025 22:44:17 +0200 |
| Message-ID: |
| <20250511204427.327558-1-lkml@antheas.dev> |
| Cc: |
| Armin Wolf <W_Armin-AT-gmx.de>, Jonathan Corbet <corbet-AT-lwn.net>, Hans de Goede <hdegoede-AT-redhat.com>, Ilpo Järvinen <ilpo.jarvinen-AT-linux.intel.com>, Jean Delvare <jdelvare-AT-suse.com>, Guenter Roeck <linux-AT-roeck-us.net>, Kurt Borja <kuurtb-AT-gmail.com>, linux-doc-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-hwmon-AT-vger.kernel.org, Antheas Kapenekakis <lkml-AT-antheas.dev> |
| Archive-link: |
| Article |
This draft patch series brings into parity the msi-wmi-platform driver with
the MSI Center M Windows application for the MSI Claw (all models).
Unfortunately, MSI Center M and this interface do not have a discovery API,
necessitating the introduction of a quirk system.
While this patch series is fully functional and tested, there are still
some issues that need to be addressed:
- Armin notes we need to disable fan curve support by default and quirk
it as well, as it is not supported on all models. However, the way
PWM enable ops work, this makes it a bit difficult, so I would like
some suggestions on how to rework this.
- It turns out that to fully disable the fan curve, we have to restore
the default fan values. This is also what is done on the OEM software.
For this, the last patch in the series is used, which is a bit dirty.
Sleep was tested with all values being preserved during S0iX (platform
profile, fan curve, PL1/PL2), so we do not need suspend/resume hooks, at
least for the Claw devices.
For PL1/PL2, we use firmware-attributes. So for that I +cc Kurt since if
his new high level interface is merged beforehand, we can use that instead.
Antheas Kapenekakis (8):
platform/x86: msi-wmi-platform: Add unlocked msi_wmi_platform_query
platform/x86: msi-wmi-platform: Add quirk system
platform/x86: msi-wmi-platform: Add platform profile through shift
mode
platform/x86: msi-wmi-platform: Add PL1/PL2 support via firmware
attributes
platform/x86: msi-wmi-platform: Add charge_threshold support
platform/x86: msi-wmi-platform: Drop excess fans in dual fan devices
platform/x86: msi-wmi-platform: Update header text
platform/x86: msi-wmi-platform: Restore fan curves on PWM disable and
unload
Armin Wolf (2):
platform/x86: msi-wmi-platform: Use input buffer for returning result
platform/x86: msi-wmi-platform: Add support for fan control
.../wmi/devices/msi-wmi-platform.rst | 26 +
drivers/platform/x86/Kconfig | 3 +
drivers/platform/x86/msi-wmi-platform.c | 1181 ++++++++++++++++-
3 files changed, 1156 insertions(+), 54 deletions(-)
base-commit: 62b1dcf2e7af3dc2879d1a39bf6823c99486a8c2
--
2.49.0
