| From: |
| Antoniu Miclaus <antoniu.miclaus-AT-analog.com> |
| To: |
| <jic23-AT-kernel.org>, <robh-AT-kernel.org>, <conor+dt-AT-kernel.org>, <linux-iio-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <linux-pwm-AT-vger.kernel.org> |
| Subject: |
| [PATCH v10 0/8] Add support for AD485x DAS Family |
| Date: |
| Fri, 17 Jan 2025 15:06:54 +0200 |
| Message-ID: |
| <20250117130702.22588-1-antoniu.miclaus@analog.com> |
| Cc: |
| Antoniu Miclaus <antoniu.miclaus-AT-analog.com> |
| Archive-link: |
| Article |
Add support for AD485X fully buffered, 8-channel simultaneous sampling,
16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
common-mode range inputs.
Most of the review comments which make sense in v9 were addressed. Some of them
might have been ommitted, especially those that are a matter of preference.
Since we reached v10, I tried to cover everything that was pointed out until now.
Antoniu Miclaus (8):
iio: backend: add API for interface get
iio: backend: add support for data size set
iio: backend: add API for oversampling
iio: adc: adi-axi-adc: add interface type
iio: adc: adi-axi-adc: set data format
iio: adc: adi-axi-adc: add oversampling
dt-bindings: iio: adc: add ad4851
iio: adc: ad4851: add ad485x driver
.../bindings/iio/adc/adi,ad4851.yaml | 153 ++
drivers/iio/adc/Kconfig | 14 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad4851.c | 1297 +++++++++++++++++
drivers/iio/adc/adi-axi-adc.c | 88 ++
drivers/iio/industrialio-backend.c | 60 +
include/linux/iio/backend.h | 19 +
7 files changed, 1632 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
create mode 100644 drivers/iio/adc/ad4851.c
--
2.48.1
