| From: |
| "Kamil Horák (2N)" <kamilh-AT-axis.com> |
| To: |
| <florian.fainelli-AT-broadcom.com>, <bcm-kernel-feedback-list-AT-broadcom.com>, <andrew-AT-lunn.ch>, <hkallweit1-AT-gmail.com>, <linux-AT-armlinux.org.uk>, <davem-AT-davemloft.net>, <edumazet-AT-google.com>, <kuba-AT-kernel.org>, <pabeni-AT-redhat.com>, <robh-AT-kernel.org>, <krzk+dt-AT-kernel.org>, <conor+dt-AT-kernel.org> |
| Subject: |
| [PATCH v11 0/4] net: phy: bcm5481x: add support for BroadR-Reach mode |
| Date: |
| Mon, 08 Jul 2024 12:27:12 +0200 |
| Message-ID: |
| <20240708102716.1246571-1-kamilh@axis.com> |
| Cc: |
| <kamilh-AT-axis.com>, <netdev-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org> |
| Archive-link: |
| Article |
PATCH 1 - Add the 10baseT1BRR_Full link mode
PATCH 2 - Add the definitions of LRE registers, necessary to use
BroadR-Reach modes on the BCM5481x PHY
PATCH 3 - Add brr-mode flag to switch between IEEE802.3 and BroadR-Reach
PATCH 4 - Implementation of the BroadR-Reach modes for the Broadcom
PHYs
Changes in v2:
- Divided into multiple patches, removed useless link modes
Changes in v3:
- Fixed uninitialized variable in bcm5481x_config_delay_swap function
Changes in v4:
- Improved the division of functions between bcm-phy library and broadcom.c
- Changed the BroadR-Reach / IEEE mode switching to device tree boolean as
these modes are mutually exclusive and barely could coexist in one hardware
- Made the link mode selection compatible with current ethtool (i.e. the
linkmode is selected by choosing speed and master-slave)
Changes in v5:
- Fixed the operator precedence as reported by the kernel test robot
- Fixed doc of bcm_linkmode_adv_to_mii_adv_t function
Changes in v6:
- Moved the brr-mode flag to separate commit as required by the rules for
DT binding patches
- Renamed some functions to make clear they handle LRE-related stuff
- Reordered variable definitions to match the coding style requirements
Changes in v7:
- Fixed the changes distribution into patches (first one was not buildable)
Changes in v8:
- Fixed coding style and did other changes on behalf of the reviewers
Changes in v9:
- Applied reviewed tags to unchanged commits, reformatted the submitter's address
Changes in v10:
- Fixed minor CR issues, clarified the embedded documentation and the commit message
Changes in v11:
- Reworded the brr-mode flag documentation
Kamil Horák (2N) (4):
net: phy: bcm54811: New link mode for BroadR-Reach
net: phy: bcm54811: Add LRE registers definitions
dt-bindings: ethernet-phy: add optional brr-mode flag
net: phy: bcm-phy-lib: Implement BroadR-Reach link modes
.../devicetree/bindings/net/ethernet-phy.yaml | 8 +
drivers/net/phy/bcm-phy-lib.c | 115 +++++
drivers/net/phy/bcm-phy-lib.h | 4 +
drivers/net/phy/broadcom.c | 405 +++++++++++++++++-
drivers/net/phy/phy-core.c | 3 +-
include/linux/brcmphy.h | 88 ++++
include/uapi/linux/ethtool.h | 1 +
net/ethtool/common.c | 3 +
8 files changed, 608 insertions(+), 19 deletions(-)
--
2.39.2
