| From: |
| Kim Seer Paller <kimseer.paller-AT-analog.com> |
| To: |
| <linux-kernel-AT-vger.kernel.org>, <linux-iio-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org> |
| Subject: |
| [PATCH v2 0/5] Add driver for LTC2664 and LTC2672 |
| Date: |
| Thu, 23 May 2024 11:19:04 +0800 |
| Message-ID: |
| <20240523031909.19427-1-kimseer.paller@analog.com> |
| Cc: |
| Jonathan Cameron <jic23-AT-kernel.org>, David Lechner <dlechner-AT-baylibre.com>, Lars-Peter Clausen <lars-AT-metafoo.de>, Liam Girdwood <lgirdwood-AT-gmail.com>, Mark Brown <broonie-AT-kernel.org>, Dimitri Fedrau <dima.fedrau-AT-gmail.com>, Krzysztof Kozlowski <krzk+dt-AT-kernel.org>, "Rob Herring" <robh-AT-kernel.org>, Conor Dooley <conor+dt-AT-kernel.org>, "Michael Hennerich" <michael.hennerich-AT-analog.com>, Nuno Sá <noname.nuno-AT-gmail.com> |
| Archive-link: |
| Article |
Generalize the ABI documentation for DAC. The ABI defined for toggle mode
channels:
LTC2664:
* out_voltageY_toggle_en
* out_voltageY_raw0
* out_voltageY_raw1
* out_voltageY_symbol
LTC2672:
* out_currentY_toggle_en
* out_currentY_raw0
* out_currentY_raw1
* out_currentY_symbol
Default channels won't have any of the above ABIs. A channel is toggle capable
if the devicetree 'adi,toggle-mode' flag is set.
changes in v2:
ltc2664:
* Updated struct ltc2664_chip_info to include device-specific data for scale,
offset, measurement type, internal vref, manual span support, and rfsadj
support.
* Added a read-only extended info attribute powerdown_mode to indicate the
state that the DAC output enters when the device is powered down.
* Refactored code for setting the span into separate function and directly
returning the span.
* Adjusted memory allocation for st->iio_channels to include null terminator.
* Spaces have been added after { and before }. Each pair of values is now
placed on a separate line.
ABI:
* Generalized the ABI documentation for DAC.
* Added DAC 42kohm_to_gnd powerdown mode.
Bindings:
* Created separate bindings for ltc2664 and ltc2672.
* Added v-pos-supply and v-neg-supply regulator properties.
* Renamed vref-supply to ref-supply based on the datasheet.
* Added io-channels property and specifying the pin for multiplexer output.
* Added vdd0-vdd4 supply properties for ltc2672, although they are not
currently supported in the driver.
* Changed clr-gpios description based on the datasheet.
* Used 4 spaces for example indentation.
Kim Seer Paller (5):
iio: ABI: Generalize ABI documentation for DAC
iio: ABI: add DAC 42kohm_to_gnd powerdown mode
dt-bindings: iio: dac: Add adi,ltc2664.yaml
dt-bindings: iio: dac: Add adi,ltc2672.yaml
iio: dac: ltc2664: Add driver for LTC2664 and LTC2672
Documentation/ABI/testing/sysfs-bus-iio | 1 +
Documentation/ABI/testing/sysfs-bus-iio-dac | 61 ++
.../ABI/testing/sysfs-bus-iio-dac-ltc2688 | 31 -
.../bindings/iio/dac/adi,ltc2664.yaml | 167 ++++
.../bindings/iio/dac/adi,ltc2672.yaml | 159 ++++
MAINTAINERS | 11 +
drivers/iio/dac/Kconfig | 11 +
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ltc2664.c | 802 ++++++++++++++++++
9 files changed, 1213 insertions(+), 31 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
create mode 100644 drivers/iio/dac/ltc2664.c
base-commit: 827dca3129708a8465bde90c86c2e3c38e62dd4f
--
2.34.1