wave5 codec driver

From: "Jackson.lee" <jackson.lee@chipsnmedia.com>

The wave5 codec driver is a stateful encoder/decoder.
The following patches is for supporting yuv422 inpuy format, supporting
runtime suspend/resume feature and extra things.

v4l2-compliance results:
========================

v4l2-compliance 1.24.1, 64 bits, 64-bit time_t

Buffer ioctls:
	    warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
	    warn: v4l2-test-buffers.cpp(693): VIDIOC_CREATE_BUFS not supported
    test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
    test VIDIOC_EXPBUF: OK
    test Requests: OK (Not Supported)

Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 2
Total for wave5-enc device /dev/video1: 45, Succeeded: 45, Failed: 0, Warnings: 0

Fluster test results:
=====================

Running test suite JCT-VC-HEVC_V1 with decoder GStreamer-H.265-V4L2-Gst1.0 Using 1 parallel job(s)
Ran 132/147 tests successfully               in 94.782 secs

(1 test fails because of not supporting to parse multi frames, 1 test fails because of a missing frame and slight corruption, 2 tests fail because of sizes which are incompatible with the IP, 11 tests fail because of unsupported 10 bit format)

Running test suite JVT-AVC_V1 with decoder GStreamer-H.264-V4L2-Gst1.0 Using 1 parallel job(s)
Ran 77/135 tests successfully               in 37.364 secs

(58 fail because the hardware is unable to decode  MBAFF / FMO / Field / Extended profile streams.)


Chnage since v1:
=================

* For [PATCH v2 0/4] media: chips-media: wave5: Support SPS/PPS generation for each IDR
 - define a macro for register addresses

* For [PATCH v2 1/4] media: chips-media: wave5: Support runtime suspend/resume
 - add auto suspend/resume

* For [PATCH v2 2/4] media: chips-media: wave5: Use helpers to calculate bytesperline and sizeimage
 - use helper functions to calculate bytesperline and sizeimage

* For [PATCH v2 3/4] media: chips-media: wave5: Support YUV422 raw pixel-formats on the encoder
 - remove unnecessary codes

Change since v0:
=================
The DEFAULT_SRC_SIZE macro was defined using multiple lines,
To make a simple define, tab and multiple lines has been removed,
The macro is defined using one line.


Jackson.lee (4):
  media: chips-media: wave5: Support SPS/PPS generation for each IDR
  media: chips-media: wave5: Support runtime suspend/resume
  media: chips-media: wave5: Use helpers to calculate bytesperline and
    sizeimage.
  media: chips-media: wave5: Support YUV422 raw pixel-formats on the
    encoder.

 .../platform/chips-media/wave5/wave5-helper.c |  24 ++
 .../platform/chips-media/wave5/wave5-helper.h |   4 +
 .../platform/chips-media/wave5/wave5-hw.c     |  23 +-
 .../chips-media/wave5/wave5-vpu-dec.c         | 261 +++++-------------
 .../chips-media/wave5/wave5-vpu-enc.c         | 260 +++++++++--------
 .../platform/chips-media/wave5/wave5-vpu.c    |  43 +++
 .../platform/chips-media/wave5/wave5-vpu.h    |   4 -
 .../platform/chips-media/wave5/wave5-vpuapi.c |  14 +-
 .../platform/chips-media/wave5/wave5-vpuapi.h |   1 +
 .../chips-media/wave5/wave5-vpuconfig.h       |  25 +-
 .../media/platform/chips-media/wave5/wave5.h  |   3 +
 11 files changed, 329 insertions(+), 333 deletions(-)

-- 
2.43.0