| From: |
| Arınç ÜNAL via B4 Relay <devnull+arinc.unal.arinc9.com-AT-kernel.org> |
| To: |
| Daniel Golle <daniel-AT-makrotopia.org>, DENG Qingfang <dqfext-AT-gmail.com>, Sean Wang <sean.wang-AT-mediatek.com>, Andrew Lunn <andrew-AT-lunn.ch>, Florian Fainelli <f.fainelli-AT-gmail.com>, Vladimir Oltean <olteanv-AT-gmail.com>, "David S. Miller" <davem-AT-davemloft.net>, Eric Dumazet <edumazet-AT-google.com>, Jakub Kicinski <kuba-AT-kernel.org>, Paolo Abeni <pabeni-AT-redhat.com>, Matthias Brugger <matthias.bgg-AT-gmail.com>, AngeloGioacchino Del Regno <angelogioacchino.delregno-AT-collabora.com>, Russell King <linux-AT-armlinux.org.uk> |
| Subject: |
| [PATCH net-next v3 0/9] MT7530 DSA Subdriver Improvements Act III |
| Date: |
| Fri, 01 Mar 2024 12:42:56 +0200 |
| Message-ID: |
| <20240301-for-netnext-mt7530-improvements-3-v3-0-449f4f166454@arinc9.com> |
| Cc: |
| mithat.guner-AT-xeront.com, erkin.bozoglu-AT-xeront.com, Bartel Eerdekens <bartel.eerdekens-AT-constell8.be>, netdev-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-arm-kernel-AT-lists.infradead.org, linux-mediatek-AT-lists.infradead.org, Arınç ÜNAL <arinc.unal-AT-arinc9.com> |
| Archive-link: |
| Article |
Hello!
This is the third patch series with the goal of simplifying the MT7530 DSA
subdriver and improving support for MT7530, MT7531, and the switch on the
MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/20230522121532.86610-1-arinc.un...
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Changes in v3:
- Patch 8
- Explain properly the behaviour of setting link down on all ports at
setup.
- Split the changes for simplifying the link settings operations out to
another patch.
- Link to v2: https://lore.kernel.org/r/20240216-for-netnext-mt7530-imp...
Changes in v2:
- Patch 8
- Use a single mt7530_rmw() instead of two mt7530_clear() and
mt7530_set() commands.
- Link to v1: https://lore.kernel.org/r/20240208-for-netnext-mt7530-imp...
---
Arınç ÜNAL (9):
net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional
net: dsa: mt7530: set interrupt register only for MT7530
net: dsa: mt7530: do not use SW_PHY_RST to reset MT7531 switch
net: dsa: mt7530: get rid of useless error returns on phylink code path
net: dsa: mt7530: get rid of priv->info->cpu_port_config()
net: dsa: mt7530: get rid of mt753x_mac_config()
net: dsa: mt7530: put initialising PCS devices code back to original order
net: dsa: mt7530: sort link settings ops and force link down on all ports
net: dsa: mt7530: simplify link operations
drivers/net/dsa/mt7530.c | 259 ++++++++---------------------------------------
drivers/net/dsa/mt7530.h | 19 +---
2 files changed, 47 insertions(+), 231 deletions(-)
---
base-commit: b6b614558ed5b2ca50edacc0f2fbf5f52158c86c
change-id: 20240131-for-netnext-mt7530-improvements-3-a8ac49d4f7c2
Best regards,
--
Arınç ÜNAL <arinc.unal@arinc9.com>
