| From: |
| Sebastian Reichel <sre-AT-kernel.org> |
| To: |
| Sebastian Reichel <sre-AT-kernel.org>, Sakari Ailus <sakari.ailus-AT-linux.intel.com>, Jacopo Mondi <jacopo.mondi-AT-ideasonboard.com> |
| Subject: |
| [PATCH v2 0/4] GC0308 Camera Sensor |
| Date: |
| Tue, 24 Oct 2023 02:59:49 +0200 |
| Message-ID: |
| <20231024010355.1877523-1-sre@kernel.org> |
| Cc: |
| Mauro Carvalho Chehab <mchehab-AT-kernel.org>, Rob Herring <robh+dt-AT-kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt-AT-linaro.org>, Conor Dooley <conor+dt-AT-kernel.org>, linux-media-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org |
| Archive-link: |
| Article |
Hi,
I did the following tests done by me on an i.MX6ULL based system [0]:
* v4l2-compliance -u /dev/v4l-subdev1
- v4l2-compliance 1.24.1, 32 bits, 32-bit time_t
(from Debian testing)
- Total for device /dev/v4l-subdev1: 44, Succeeded: 44
* Using gstreamer + v4l2-ctl
- Tried 640x480, 320x240, 160x120 YUYV8_2X8 formats
- Tested effect of all exposed user controls
* checkpatch does not report any driver issues
* dt_binding_check does not report anything
[0] https://embedded-recipes.org/2023/schedule/running-foss-thermal-camera/
Changes since PATCHv1:
* https://lore.kernel.org/all/20231023002547.1754190-1-sre@...
* Update binding: i2c0 -> i2c
* Update binding: make GC0309 use GC0308 as fallback compatible
* Add regulator handling in power_on/power_off
* Fix alignment of regmap_multi_reg_write arguments
* Fix useless extra return
* Do not check for pad in gc0308_enum_frame_size()
* Drop get_mbus_config implementation
* Use V4L2_CID_AUTO_EXPOSURE_BIAS instead of V4L2_CID_EXPOSURE
* Drop gc0308_get_format in favour of v4l2_subdev_get_fmt
* Replace open-coded v4l2_find_nearest_size() logic
* check clock rate instead of setting it
* use fwnode_graph_get_endpoint_by_id()
* power off device when probe errors out after power on
* replace mutex with sub-device state
* add Galaxycore to generic camera sensors section in MAINTAINERS
* add GC0308 entry in MAINTAINERS
Greetings,
-- Sebastian
Sebastian Reichel (4):
dt-bindings: vendor-prefixes: add GalaxyCore
media: dt-bindings: gc0308: add binding
media: MAINTAINERS: Add GalaxyCore in camera sensor section
media: i2c: gc0308: new driver
.../bindings/media/i2c/galaxycore,gc0308.yaml | 108 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 14 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/gc0308.c | 1418 +++++++++++++++++
6 files changed, 1551 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
create mode 100644 drivers/media/i2c/gc0308.c
--
2.42.0
