| From: |
| Paulo Pavacic <pavacic.p-AT-gmail.com> |
| To: |
| neil.armstrong-AT-linaro.org, sam-AT-ravnborg.org, airlied-AT-gmail.com, daniel-AT-ffwll.ch, robh+dt-AT-kernel.org, krzysztof.kozlowski+dt-AT-linaro.org, conor+dt-AT-kernel.org |
| Subject: |
| [PATCH 0/2] drm/panel: add fannal c3004 panel |
| Date: |
| Fri, 19 May 2023 16:24:54 +0200 |
| Message-ID: |
| <20230519142456.2588145-1-pavacic.p@gmail.com> |
| Cc: |
| dri-devel-AT-lists.freedesktop.org, linux-kernel-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, Paulo Pavacic <pavacic.p-AT-gmail.com> |
| Archive-link: |
| Article |
Fannal C3004 is a 2 lane MIPI DSI 480x800 panel which requires initialization with DSI DCS commands. After some commands delay is required.
In previous discussions for device tree [1] [2] and device driver [3] were named mipi-dsi-bringup.
[1] https://patchwork.ozlabs.org/project/devicetree-bindings/...
[2] https://patchwork.ozlabs.org/project/devicetree-bindings/...
[3] https://lists.freedesktop.org/archives/dri-devel/2023-May...
Paulo Pavacic (2):
dt-bindings: display: panel: add fannal,c3004
drm/panel-fannal-c3004: Add fannal c3004 DSI panel
.../bindings/display/panel/fannal,c3004.yaml | 75 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 7 +
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-fannal-c3004.c | 405 ++++++++++++++++++
6 files changed, 501 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/fannal,c3004.yaml
create mode 100644 drivers/gpu/drm/panel/panel-fannal-c3004.c
--
2.40.1
