| From: |
| Manikanta Guntupalli <manikanta.guntupalli-AT-xilinx.com> |
| To: |
| <michal.simek-AT-xilinx.com>, <michal.simek-AT-amd.com>, <linux-arm-kernel-AT-lists.infradead.org>, <linux-i2c-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <git-AT-amd.com> |
| Subject: |
| [PATCH 00/12] i2c: xiic: Added Standard mode and SMBus |
| Date: |
| Fri, 24 Jun 2022 17:35:15 +0530 |
| Message-ID: |
| <1656072327-13628-1-git-send-email-manikanta.guntupalli@xilinx.com> |
| Cc: |
| Manikanta Guntupalli <manikanta.guntupalli-AT-xilinx.com> |
| Archive-link: |
| Article |
-Added standard mode for AXI I2C controller.
-Added Smbus block read support to xiic driver.
-Added 'xlnx,axi-iic-2.1' new IP version support.
-Added dynamic SCL frequency configuration support.
-Removed 'local_irq_save/restore' calls as discussed
here: https://www.spinics.net/lists/linux-i2c/msg46483.html.
-Corrected the BNB interrupt enable sequence.
Raviteja Narayanam (11):
i2c: xiic: Add standard mode support for > 255 byte read transfers
i2c: xiic: Enter standard mode only for > 255 byte read transfers
i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
i2c: xiic: Add wait for FIFO empty in send_tx
i2c: xiic: Use 'nmsgs' variable instead of repeated_start
i2c: xiic: Add smbus_block_read functionality
i2c: xiic: Switch to Xiic standard mode for i2c-read
i2c: xiic: Remove interrupt enable/disable in Rx path
dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
i2c: xiic: Update compatible with new IP version
i2c: xiic: Add SCL frequency configuration support
Srinivas Goud (1):
i2c: xiic: Correct the BNB interrupt enable sequence
.../bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 +-
drivers/i2c/busses/i2c-xiic.c | 631 ++++++++++++++++--
2 files changed, 578 insertions(+), 57 deletions(-)
--
2.25.1
