| From: |
| Satya Priya <quic_c_skakit-AT-quicinc.com> |
| To: |
| Bjorn Andersson <bjorn.andersson-AT-linaro.org>, Rob Herring <robh+dt-AT-kernel.org> |
| Subject: |
| [PATCH V11 0/9] Add Qualcomm Technologies, Inc. PM8008 regulator driver |
| Date: |
| Thu, 05 May 2022 14:55:30 +0530 |
| Message-ID: |
| <1651742739-12338-1-git-send-email-quic_c_skakit@quicinc.com> |
| Cc: |
| Lee Jones <lee.jones-AT-linaro.org>, Liam Girdwood <lgirdwood-AT-gmail.com>, Mark Brown <broonie-AT-kernel.org>, <linux-arm-msm-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <swboyd-AT-chromium.org>, <quic_collinsd-AT-quicinc.com>, <quic_subbaram-AT-quicinc.com>, <quic_jprakash-AT-quicinc.com>, Satya Priya <quic_c_skakit-AT-quicinc.com> |
| Archive-link: |
| Article |
Satya Priya (9):
dt-bindings: mfd: pm8008: Add reset-gpios
dt-bindings: mfd: pm8008: Change the address cells
dt-bindings: mfd: pm8008: Add regulators for pm8008
mfd: pm8008: Add reset-gpios
mfd: pm8008: Remove the regmap member from pm8008_data struct
mfd: pm8008: Use i2c_new_dummy_device() API
regulator: Add a regulator driver for the PM8008 PMIC
arm64: dts: qcom: pm8008: Add base dts file
arm64: dts: qcom: sc7280: Add pm8008 support for sc7280-idp
.../devicetree/bindings/mfd/qcom,pm8008.yaml | 69 ++++++-
arch/arm64/boot/dts/qcom/pm8008.dtsi | 54 ++++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 66 +++++++
drivers/mfd/qcom-pm8008.c | 57 ++++--
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-pm8008-regulator.c | 216 +++++++++++++++++++++
include/linux/mfd/qcom_pm8008.h | 8 +
8 files changed, 462 insertions(+), 18 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi
create mode 100644 drivers/regulator/qcom-pm8008-regulator.c
create mode 100644 include/linux/mfd/qcom_pm8008.h
--
2.7.4
