| From: |
| Daniel Scally <djrscally-AT-gmail.com> |
| To: |
| linux-media-AT-vger.kernel.org |
| Subject: |
| [PATCH v2 00/11] Support OVTI7251 on Microsoft Surface line |
| Date: |
| Fri, 25 Feb 2022 00:07:42 +0000 |
| Message-ID: |
| <20220225000753.511996-1-djrscally@gmail.com> |
| Cc: |
| yong.zhi-AT-intel.com, sakari.ailus-AT-linux.intel.com, bingbu.cao-AT-intel.com, tian.shu.qiu-AT-intel.com, andriy.shevchenko-AT-linux.intel.com, hverkuil-cisco-AT-xs4all.nl |
| Archive-link: |
| Article |
Hello all
This series extends the OV7251 driver so it's functional on the
Microsoft Surface line of laptops, where it's used as the IR
camera for face login. The camera sensor is connected to a CIO2
device which packs the 10-bit greyscale data into 25 pixels per 32
bytes similar to the IPU3 formats for Bayer data, so I also added
a new format to describe that and added it to the ipu3-cio2 driver's
list of supported formats.
Series-level changes:
- Added patch 5 removing per-mode frequency settings
Thanks
Dan
Daniel Scally (11):
media: uapi: Add IPU3 packed Y10 format
media: ipu3-cio2: Add support for V4L2_PIX_FMT_IPU3_Y10
media: i2c: Add acpi support to ov7251
media: i2c: Provide ov7251_check_hwcfg()
media: i2c: Remove per-mode frequencies from ov7251
media: i2c: Add ov7251_pll_configure()
media: i2c: Add support for new frequencies to ov7251
media: i2c: Add ov7251_detect_chip()
media: i2c: Add pm_runtime support to ov7251
media: i2c: Remove .s_power() from ov7251
media: ipu3-cio2: Add INT347E to cio2-bridge
.../media/v4l/pixfmt-yuv-luma.rst | 14 +-
drivers/media/i2c/ov7251.c | 565 ++++++++++++------
drivers/media/pci/intel/ipu3/cio2-bridge.c | 2 +
drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 7 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
include/uapi/linux/videodev2.h | 3 +-
6 files changed, 412 insertions(+), 180 deletions(-)
--
2.25.1
