| From: |
| Russ Weight <russell.h.weight-AT-intel.com> |
| To: |
| sudeep.holla-AT-arm.com, cristian.marussi-AT-arm.com, ardb-AT-kernel.org, bjorn.andersson-AT-linaro.org, gregkh-AT-linuxfoundation.org, linux-kernel-AT-vger.kernel.org |
| Subject: |
| [RFC PATCH 0/5] Firmware Upload Framework |
| Date: |
| Wed, 10 Nov 2021 17:13:40 -0800 |
| Message-ID: |
| <20211111011345.25049-1-russell.h.weight@intel.com> |
| Cc: |
| trix-AT-redhat.com, lgoncalv-AT-redhat.com, yilun.xu-AT-intel.com, hao.wu-AT-intel.com, matthew.gerlach-AT-intel.com, Russ Weight <russell.h.weight-AT-intel.com> |
| Archive-link: |
| Article |
The Firmware Upload framework provides a common API for uploading firmware
files to target devices. An example use case involves FPGA devices that
load FPGA, Card BMC, and firmware images from FLASH when the card boots.
Users need the ability to update these firmware images while the card is
in use.
Device drivers that instantiate the Firmware Upload class driver will
interact with the target device to transfer and authenticate the firmware
data. Uploads are performed in the context of a kernel worker thread in
order to facilitate progress indicators during lengthy uploads.
This driver was previously submitted in the context of the FPGA sub-
system as the "FPGA Image Load Framework", but the framework is generic
enough to support other devices as well. The previous submission of this
patch-set can be viewed here:
https://marc.info/?l=linux-kernel&m=163295640216820&...
The n3000bmc-sec-update driver is the first driver to use the Firmware
Upload API. A recent version of these patches can be viewed here:
https://marc.info/?l=linux-kernel&m=163295697217095&...
I don't think I am duplicating any functionality that is currently covered
in the firmware subsystem. I appreciate your feedback on these patches.
- Russ
Russ Weight (5):
firmware: Create firmware upload framework
firmware: upload: Enable firmware uploads
firmware: upload: Signal eventfd when complete
firmware: upload: Add status ioctl
firmware: upload: Enable cancel of firmware upload
.../driver-api/firmware/firmware-upload.rst | 54 +++
Documentation/driver-api/firmware/index.rst | 1 +
MAINTAINERS | 9 +
drivers/firmware/Kconfig | 8 +
drivers/firmware/Makefile | 1 +
drivers/firmware/firmware-upload.c | 413 ++++++++++++++++++
include/linux/firmware/firmware-upload.h | 69 +++
include/uapi/linux/firmware-upload.h | 73 ++++
8 files changed, 628 insertions(+)
create mode 100644 Documentation/driver-api/firmware/firmware-upload.rst
create mode 100644 drivers/firmware/firmware-upload.c
create mode 100644 include/linux/firmware/firmware-upload.h
create mode 100644 include/uapi/linux/firmware-upload.h
--
2.25.1
