| From: |
| Robert Marko <robert.marko-AT-sartura.hr> |
| To: |
| agross-AT-kernel.org, bjorn.andersson-AT-linaro.org, robh+dt-AT-kernel.org, linux-kernel-AT-vger.kernel.org, linux-arm-msm-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, davem-AT-davemloft.net, kuba-AT-kernel.org, netdev-AT-vger.kernel.org, andrew-AT-lunn.ch, hkallweit1-AT-gmail.com, linux-AT-armlinux.org.uk |
| Subject: |
| [PATCH v2 net-next 0/4] Add support for Qualcomm QCA807x PHYs |
| Date: |
| Wed, 10 Feb 2021 13:55:19 +0100 |
| Message-ID: |
| <20210210125523.2146352-1-robert.marko@sartura.hr> |
| Cc: |
| Robert Marko <robert.marko-AT-sartura.hr> |
| Archive-link: |
| Article |
This patch series adds support for Qualcomm QCA807x PHYs.
These are really common companion PHYs on boards featuring
Qualcomm IPQ40xx, IPQ60xx and IPQ807x SoCs.
They are 2 or 5 port IEEE 802.3 clause 22 compliant
10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s.
They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC,
while second one is SGMII for connection to MAC or fiber.
Both models have a combo port that supports 1000BASE-X and 100BASE-FX
fiber.
Each PHY inside of QCA807x series has 2 digitally controlled output only
pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled by
user space, so lets enable registering each PHY as GPIO controller and
add driver for it.
Robert Marko (4):
dt-bindings: net: Add QCA807x PHY
dt-bindings: net: Add bindings for Qualcomm QCA807x
net: phy: Add Qualcomm QCA807x driver
MAINTAINERS: Add entry for Qualcomm QCA807x PHY driver
.../devicetree/bindings/net/qcom,qca807x.yaml | 70 ++
MAINTAINERS | 9 +
drivers/net/phy/Kconfig | 10 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/qca807x.c | 855 ++++++++++++++++++
include/dt-bindings/net/qcom-qca807x.h | 30 +
6 files changed, 975 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml
create mode 100644 drivers/net/phy/qca807x.c
create mode 100644 include/dt-bindings/net/qcom-qca807x.h
--
2.29.2
