| From: |
| Al Cooper <alcooperx-AT-gmail.com> |
| To: |
| linux-kernel-AT-vger.kernel.org |
| Subject: |
| [PATCH v2 0/2] usb: Add driver for USB signal re-mapper |
| Date: |
| Fri, 09 Oct 2020 15:08:37 -0400 |
| Message-ID: |
| <20201009190839.12612-1-alcooperx@gmail.com> |
| Cc: |
| Al Cooper <alcooperx-AT-gmail.com>, bcm-kernel-feedback-list-AT-broadcom.com, devicetree-AT-vger.kernel.org, Florian Fainelli <f.fainelli-AT-gmail.com>, Greg Kroah-Hartman <gregkh-AT-linuxfoundation.org>, Krzysztof Kozlowski <krzk-AT-kernel.org>, linux-arm-kernel-AT-lists.infradead.org, linux-usb-AT-vger.kernel.org, Rob Herring <robh+dt-AT-kernel.org> |
| Archive-link: |
| Article |
v2
- Move file from drivers/usb/host to drivers/usb/misc
- Combine Kconfig/Makefile patch and new driver patch
- Fixed bindings .yaml document based on feedback from Rob Herring
- NOTE: There were suggestions to use a pinmux driver or
GPIO aggregator, but I think agreement was reached that
they weren't a good fit.
Al Cooper (2):
dt-bindings: Add support for Broadcom USB pin map driver
usb: Add driver to allow any GPIO to be used for 7211 USB signals
.../bindings/usb/brcm,usb-pinmap.yaml | 70 ++++
MAINTAINERS | 8 +
drivers/usb/misc/Kconfig | 9 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/brcmstb-usb-pinmap.c | 348 ++++++++++++++++++
5 files changed, 436 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
create mode 100644 drivers/usb/misc/brcmstb-usb-pinmap.c
--
2.17.1
