| From: |
| Dongchun Zhu <dongchun.zhu-AT-mediatek.com> |
| To: |
| <linus.walleij-AT-linaro.org>, <bgolaszewski-AT-baylibre.com>, <mchehab-AT-kernel.org>, <andriy.shevchenko-AT-linux.intel.com>, <robh+dt-AT-kernel.org>, <mark.rutland-AT-arm.com>, <sakari.ailus-AT-linux.intel.com>, <drinkcat-AT-chromium.org>, <tfiga-AT-chromium.org>, <matthias.bgg-AT-gmail.com>, <bingbu.cao-AT-intel.com> |
| Subject: |
| [V9, 0/2] media: i2c: Add support for OV02A10 sensor |
| Date: |
| Sat, 23 May 2020 16:41:01 +0800 |
| Message-ID: |
| <20200523084103.31276-1-dongchun.zhu@mediatek.com> |
| Cc: |
| <srv_heupstream-AT-mediatek.com>, <linux-mediatek-AT-lists.infradead.org>, <linux-arm-kernel-AT-lists.infradead.org>, <sj.huang-AT-mediatek.com>, <linux-media-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <louis.kuo-AT-mediatek.com>, <shengnan.wang-AT-mediatek.com>, <dongchun.zhu-AT-mediatek.com> |
| Archive-link: |
| Article |
Hello,
This series adds DT bindings in YAML and V4L2 sub-device driver for Omnivision's
OV02A10 2 megapixel CMOS 1/5" sensor, which has a single MIPI lane interface(I/F)
and output format of 10-bit RAW.
The driver is implemented with V4L2 Framework.
- Async registered as one V4L2 sub-device.
- As the first component of camera system including Seninf/ISP processing pipeline.
- A media entity that provides one source pad in common and two for dual camera.
Previous versions of this patch-set can be found here:
v8: https://lore.kernel.org/linux-media/20200509080627.23222-...
v7: https://lore.kernel.org/linux-media/20200430080924.1140-1...
v6: https://lore.kernel.org/linux-media/20191211112849.16705-...
v5: https://lore.kernel.org/linux-media/20191104105713.24311-...
v4: https://lore.kernel.org/linux-media/20190907092728.23897-...
v3: https://lore.kernel.org/linux-media/20190819034331.13098-...
v2: https://lore.kernel.org/linux-media/20190704084651.3105-1...
v1: https://lore.kernel.org/linux-media/20190523102204.24112-...
Changes of v9 mainly address comments from Rob, Sakari, Tomasz, Andy.
Including:
- Add more detailed descriptions for powerdown-gpios and reset-gpios in DT
- Set default to properties: "rotation" and "ovti,mipi-tx-speed"
- Remove reserved values of "ovti,mipi-tx-speed"
- Use ARRAY_SIZE() directly to replace of defining macro function
- Remove __maybe_unused specifier for ov02a10_power_on and ov02a10_power_off
- Refine driver by removing unnecessary logs and unused macros or fields.
- Power off sensor when async register subdev failed and !pm_runtime_enabled()
- Fix other review comments in v8
Please review.
Thanks.
Dongchun Zhu (2):
media: dt-bindings: media: i2c: Document OV02A10 bindings
media: i2c: ov02a10: Add OV02A10 image sensor driver
.../bindings/media/i2c/ovti,ov02a10.yaml | 172 ++++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov02a10.c | 1025 ++++++++++++++++++++
5 files changed, 1219 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
create mode 100644 drivers/media/i2c/ov02a10.c
--
2.9.2
