Enable GPU for SM8150 and SM8250

This series adds the missing clock drivers and dts nodes to enable
the GPU on both SM8150 and SM8250.

Adreno 640/650 support was recently added to drm/msm [1], but an
extra patch [2] is still required for GPU to actually work on SM8250.

[1] https://patchwork.freedesktop.org/series/76198/
[2] https://gist.github.com/flto/784f1aca761ebf2fe6c105719a4a...

Jonathan Marek (10):
  clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
  clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid
  clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll
  clk: qcom: gcc: remove unnecessary vco_table from SM8150
  dt-bindings: clock: Introduce SM8150 QCOM Graphics clock bindings
  dt-bindings: clock: Introduce SM8250 QCOM Graphics clock bindings
  clk: qcom: Add graphics clock controller driver for SM8150
  clk: qcom: Add graphics clock controller driver for SM8250
  arm64: dts: qcom: add sm8150 GPU nodes
  arm64: dts: qcom: add sm8250 GPU nodes

 arch/arm64/boot/dts/qcom/sm8150.dtsi          | 132 +++++
 arch/arm64/boot/dts/qcom/sm8250.dtsi          | 139 ++++++
 drivers/clk/qcom/Kconfig                      |  16 +
 drivers/clk/qcom/Makefile                     |   2 +
 drivers/clk/qcom/clk-alpha-pll.c              |  70 ++-
 drivers/clk/qcom/clk-alpha-pll.h              |  15 +-
 drivers/clk/qcom/gcc-sm8150.c                 |  18 +-
 drivers/clk/qcom/gpucc-sm8150.c               | 429 ++++++++++++++++
 drivers/clk/qcom/gpucc-sm8250.c               | 458 ++++++++++++++++++
 include/dt-bindings/clock/qcom,gpucc-sm8150.h |  40 ++
 include/dt-bindings/clock/qcom,gpucc-sm8250.h |  40 ++
 11 files changed, 1304 insertions(+), 55 deletions(-)
 create mode 100644 drivers/clk/qcom/gpucc-sm8150.c
 create mode 100644 drivers/clk/qcom/gpucc-sm8250.c
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8150.h
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8250.h

-- 
2.26.1