| From: |
| Sumit Semwal <sumit.semwal-AT-linaro.org> |
| To: |
| agross-AT-kernel.org, bjorn.andersson-AT-linaro.org, lgirdwood-AT-gmail.com, broonie-AT-kernel.org, robh+dt-AT-kernel.org |
| Subject: |
| [v2 0/4] Qualcomm labibb regulator driver |
| Date: |
| Sat, 9 May 2020 02:11:56 +0530 |
| Message-ID: |
| <20200508204200.13481-1-sumit.semwal@linaro.org> |
| Cc: |
| nishakumari-AT-codeaurora.org, linux-arm-msm-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, kgunda-AT-codeaurora.org, rnayak-AT-codeaurora.org, Sumit Semwal <sumit.semwal-AT-linaro.org> |
| Archive-link: |
| Article |
This series adds a driver for LAB/IBB regulators found on some Qualcomm SoCs.
These regulators provide positive and/or negative boost power supplies
for LCD/LED display panels connected to the SoC.
This series adds the support for pmi8998 PMIC found in SDM845 family of SoCs.
Changes from v1:
- Incorporated review comments from v1
- Changed from virtual-regulator based handling to individual regulator based
handling.
- Reworked the core to merge most of enable/disable functions, combine the
regulator_ops into one and allow for future variations.
- is_enabled() is now _really_ is_enabled()
- Simplified the SC interrupt handling - use regmap_read_poll_timeout,
REGULATOR_EVENT_OVER_CURRENT handling and notification to clients.
Nisha Kumari (4):
dt-bindings: regulator: Add labibb regulator
arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
regulator: qcom: Add labibb driver
regulator: qcom: labibb: Add SC interrupt handling
.../regulator/qcom-labibb-regulator.txt | 47 +++
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 +
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom-labibb-regulator.c | 385 ++++++++++++++++++
5 files changed, 459 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt
create mode 100644 drivers/regulator/qcom-labibb-regulator.c
--
2.26.2
