| From: |
| Ivan Mikhaylov <i.mikhaylov-AT-yadro.com> |
| To: |
| unlisted-recipients:; (no To-header on input) |
| Subject: |
| [PATCH v13 0/2] iio: proximity: driver for vcnl3020 |
| Date: |
| Thu, 7 May 2020 16:25:58 +0300 |
| Message-ID: |
| <20200507132600.8801-1-i.mikhaylov@yadro.com> |
| Cc: |
| Ivan Mikhaylov <i.mikhaylov-AT-yadro.com>, Jonathan Cameron <jic23-AT-kernel.org>, Hartmut Knaack <knaack.h-AT-gmx.de>, Lars-Peter Clausen <lars-AT-metafoo.de>, Peter Meerwald-Stadler <pmeerw-AT-pmeerw.net>, <linux-iio-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, Mark Rutland <mark.rutland-AT-arm.com>, Rob Herring <robh+dt-AT-kernel.org>, Andy Shevchenko <andy.shevchenko-AT-gmail.com> |
| Archive-link: |
| Article |
Add proximity sensor driver for Vishay vcnl3020. Only on-demand
measurement is supported for now.
Changes from v12:
1. forgot to change path inside yaml.
Changes from v11:
1. minor changes to yaml.
Changes from v10:
1. add vcnl3020_property struct for optional properties.
Changes from v9:
1. minor changes.
2. pass microamps from dts, not register value.
Changes from v8:
1. add vcnl3020 prefix into get_and_apply_property function.
2. add bsd license into yaml.
3. vishay,led-current-milliamp -> vishay,led-current-microamp.
4. add default value into vishay,led-current-microamp and change
register values into microamps.
Changes from v7:
1. forgot to add Reviewed-by tag.
Changes from v6:
1. minor changes
1.1 remove VCNL_DRV_NAME
1.2 add braces in get_and_apply_property
Changes from v5:
1. add get_and_apply_property function for optional parameters.
2. minor changes.
Changes from v4:
1. add vdd-supply,vddio-supply,interrupts properties into yaml.
2. led-current -> vishay,led-current-milliamp in yaml.
3. add possible values enum list.
4. add bulk_read for result hi/lo registers.
5. add description of vcnl3020_data structure.
6. vcnl3020 id table is removed.
7. make "vishay,led-current-milliamp" optional in yaml and code.
Changes from v3:
1. minor changes.
2. add i2c block to fix dts section in yaml.
Changes from v2:
1. using regmap_read_poll_timeout instead of do-while in measurement
function.
2. change struct i2client* in vcnl3020_data to struct dev*
3. enable REGMAP_I2C in Kconfig
Changes from v1:
1. using regmap interface instead of i2c_smbus_* calls.
2. switch from probe to probe_new.
3. s32/int32_t -> int
Ivan Mikhaylov (2):
dt-bindings: proximity: provide vcnl3020 device tree binding document
iio: proximity: Add driver support for vcnl3020 proximity sensor
.../iio/proximity/vishay,vcnl3020.yaml | 65 +++++
drivers/iio/proximity/Kconfig | 11 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/vcnl3020.c | 258 ++++++++++++++++++
4 files changed, 335 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/vishay,vcnl3020.yaml
create mode 100644 drivers/iio/proximity/vcnl3020.c
--
2.21.1
