| From: |
| Eddie James <eajames-AT-linux.ibm.com> |
| To: |
| linux-iio-AT-vger.kernel.org |
| Subject: |
| [PATCH v3 0/3] iio: Add driver for Infineon DPS310 |
| Date: |
| Wed, 15 May 2019 13:41:14 -0500 |
| Message-ID: |
| <1557945677-12838-1-git-send-email-eajames@linux.ibm.com> |
| Cc: |
| linux-kernel-AT-vger.kernel.org, joel-AT-jms.id.au, lars-AT-metafoo.de, knaack.h-AT-gmx.de, jic23-AT-kernel.org, Eddie James <eajames-AT-linux.ibm.com> |
| Archive-link: |
| Article |
The DPS310 is a temperature and pressure sensor. It can be accessed over i2c
and SPI.
The driver supports polled measurement of temperature and pressure over i2c
only.
Changes since v2:
- Switch to processed rather than raw for both pressure and temperature
- Add locking around writing frequency/sampling rates and sensor reads
- Further cleanup
Changes since v1:
- Switch to wait for temperature/pressure sensor ready
- Various cleanup
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Eddie James (1):
iio: dps310: Add pressure sensing capability
Joel Stanley (1):
iio: Add driver for Infineon DPS310
MAINTAINERS | 6 +
drivers/iio/pressure/Kconfig | 10 +
drivers/iio/pressure/Makefile | 1 +
drivers/iio/pressure/dps310.c | 824 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 841 insertions(+)
create mode 100644 drivers/iio/pressure/dps310.c
--
1.8.3.1
