| From: |
| <min.guo-AT-mediatek.com> |
| To: |
| Bin Liu <b-liu-AT-ti.com>, Rob Herring <robh+dt-AT-kernel.org> |
| Subject: |
| [PATCH 0/4] Add MediaTek MUSB Controller Driver |
| Date: |
| Thu, 27 Dec 2018 15:34:22 +0800 |
| Message-ID: |
| <1545896066-897-1-git-send-email-min.guo@mediatek.com> |
| Cc: |
| Greg Kroah-Hartman <gregkh-AT-linuxfoundation.org>, Mark Rutland <mark.rutland-AT-arm.com>, Matthias Brugger <matthias.bgg-AT-gmail.com>, Alan Stern <stern-AT-rowland.harvard.edu>, <chunfeng.yun-AT-mediatek.com>, <linux-usb-AT-vger.kernel.org>, <devicetree-AT-vger.kernel.org>, <linux-kernel-AT-vger.kernel.org>, <linux-arm-kernel-AT-lists.infradead.org>, <linux-mediatek-AT-lists.infradead.org>, Min Guo <min.guo-AT-mediatek.com> |
| Archive-link: |
| Article |
From: Min Guo <min.guo@mediatek.com>
These patches introduce the MediaTek MUSB controller driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only modes. This has beed tested on
MT2701 with a variety of devices in host mode and with the
f_mass gadget driver in peripheral mode, plugging otg cables
in/out a lot of times in all possible imaginable plug orders
Min Guo (4):
dt-bindings: usb: musb: Add support for MediaTek musb controller
arm: dts: mt2701: Add usb2 device nodes
usb: musb: Move musbhsdma macro definition to musb_dma.h
usb: musb: Add support for MediaTek musb controller
.../devicetree/bindings/usb/mediatek,musb.txt | 49 ++
arch/arm/boot/dts/mt2701-evb.dts | 21 +
arch/arm/boot/dts/mt2701.dtsi | 34 ++
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mediatek.c | 562 +++++++++++++++++++++
drivers/usb/musb/musb_core.c | 10 +
drivers/usb/musb/musb_core.h | 1 +
drivers/usb/musb/musb_dma.h | 7 +
drivers/usb/musb/musb_host.c | 79 ++-
drivers/usb/musb/musb_regs.h | 6 +
drivers/usb/musb/musbhsdma.c | 41 +-
12 files changed, 782 insertions(+), 37 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
create mode 100644 drivers/usb/musb/mediatek.c
--
1.9.1
