| From: |
| Jon Mason <jon.mason-AT-broadcom.com> |
| To: |
| Kishon Vijay Abraham I <kishon-AT-ti.com>, Florian Fainelli <f.fainelli-AT-gmail.com>, Rob Herring <robh+dt-AT-kernel.org>, Mark Rutland <mark.rutland-AT-arm.com> |
| Subject: |
| [PATCH v2 0/6] USB3 support for Broadcom NS2 SoC |
| Date: |
| Wed, 26 Jul 2017 18:56:21 -0400 |
| Message-ID: |
| <1501109787-15489-1-git-send-email-jon.mason@broadcom.com> |
| Cc: |
| bcm-kernel-feedback-list-AT-broadcom.com, devicetree-AT-vger.kernel.org, linux-arm-kernel-AT-lists.infradead.org, linux-kernel-AT-vger.kernel.org |
Changes in v2:
* Addressed Rob Herring's comments on the binding documentation, which
resulted in a restructing of the device tree and how the driver
references those nodes. This, in turn, resulted in a few new
documentation files being created.
This patch set contains the USB3 support for Broadcom NS2 SoC. The USB3
PHY is connected through the MDIO interface.
Jon Mason (3):
dt-bindings: usb: Add documentation for NS2 CDRU USB3
dt-bindings: usb: Add documentation for NS2 ICFG USB3
dt-bindings: usb: Add documentation for NS2 IDM USB3
Yendapally Reddy Dhananjaya Reddy (3):
dt-bindings: phy: Add documentation for NS2 USB3 PHY
phy: Add USB3 PHY support for Broadcom NS2 SoC
arm64: dts: ns2: Add USB3 Support
.../devicetree/bindings/phy/brcm,ns2-usb3-phy.txt | 48 ++
.../bindings/usb/brcm,cdru-usb3-ctrl.txt | 14 +
.../devicetree/bindings/usb/brcm,icfg-usb.txt | 13 +
.../devicetree/bindings/usb/brcm,usb3-idm.txt | 14 +
arch/arm64/boot/dts/broadcom/ns2-svk.dts | 16 +
arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 8 +
arch/arm64/boot/dts/broadcom/ns2.dtsi | 59 +++
drivers/phy/broadcom/Kconfig | 9 +
drivers/phy/broadcom/Makefile | 1 +
drivers/phy/broadcom/phy-bcm-ns2-usb3.c | 580 +++++++++++++++++++++
10 files changed, 762 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,ns2-usb3-phy.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,cdru-usb3-ctrl.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,icfg-usb.txt
create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb3-idm.txt
create mode 100644 drivers/phy/broadcom/phy-bcm-ns2-usb3.c
--
2.7.4
