Finishing out the 4.10 merge window [LWN.net]

Finishing out the 4.10 merge window

Posted Jan 7, 2017 19:41 UTC (Sat) by zlynx (guest, #2285)
In reply to: Finishing out the 4.10 merge window by pizza
Parent article: Finishing out the 4.10 merge window

I'm not sure about modern stuff being that much faster.

I've got an older system that I use as a guest computer which is running an Intel 980x released in 2010. It is still very competitive in gaming (the video card is an AMD from 2014) and really not that much slower than the 5960x in my current gaming system.

Clock speeds are now very static and adding more execution units and better prediction helps but only on the right sort of work loads.

to post comments

Finishing out the 4.10 merge window

Posted Jan 7, 2017 19:44 UTC (Sat) by davidstrauss (guest, #85867) [Link] (1 responses)

It's not only a matter of faster processors. There's power efficiency, storage, networking, memory, and other aspects that will also be limited in a 2008 chipset and build.

Finishing out the 4.10 merge window

Posted Jan 7, 2017 19:55 UTC (Sat) by zlynx (guest, #2285) [Link]

Yes true. Mostly about the power efficiency but that extra cost has to balance against replacing all of the hardware you've currently got.

Networking and storage in servers in my experience is mostly about the latency. It does depend on the application and perhaps you really do have a difference between 1 Gbps and 40 Gbps to the SAN, but for most things it is database indexing and record retrieval which takes the same number of milliseconds no matter how fast the link is.

And of course bigger faster RAM is nice and it is pretty great to get 256 GB on one node these days. But if you're using a multiple-terabyte sized database your cache hit rate isn't going to be *that* much better. Depends on the application.

So, I think it can be a reasonable decision to keep using old systems as long as they are performing well enough and the maintenance costs are lower than replacement costs.

Finishing out the 4.10 merge window

Posted Jan 13, 2017 18:19 UTC (Fri) by anton (subscriber, #25547) [Link]

The PA-RISC CPUs (like most other RISCs) have not kept up with Intel and AMD in the MHz race of the late 1990s and early 2000s (before the race hit the wall in 2003-2005), and the fastest one runs at 1100MHz, and has a 6400MB/s memory bus (compared to 19200MB/s for a single DDR4-2400 DIMM, with two accessible in parallel by a desktop Intel CPU), and the IPC (instructions per cycle) are likely also lower than on a current Intel CPU, so the PA-RISC is really much slower than a current Intel or AMD-based system.

But some of us like our old hardware. E.g., we have an Alpha running that we bought in 1998. These systems are not competetive as workhorses, but if you want to do experiments with the architecture or with software running on the architecture, they are the real thing; and if you don't have the real thing, you have nothing to validate a simulator against.