| From: |
| M'boumba Cedric Madianga <cedric.madianga-AT-gmail.com> |
| To: |
| wsa-AT-the-dreams.de, robh+dt-AT-kernel.org, mcoquelin.stm32-AT-gmail.com, alexandre.torgue-AT-st.com, linus.walleij-AT-linaro.org, patrice.chotard-AT-st.com, linux-AT-armlinux.org.uk, linux-i2c-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-arm-kernel-AT-lists.infradead.org, linux-kernel-AT-vger.kernel.org |
| Subject: |
| [PATCH v7 0/5] Add support for the STM32F4 I2C |
| Date: |
| Thu, 22 Dec 2016 14:34:59 +0100 |
| Message-ID: |
| <1482413704-17531-1-git-send-email-cedric.madianga@gmail.com> |
| Cc: |
| M'boumba Cedric Madianga <cedric.madianga-AT-gmail.com> |
This patchset adds support for the I2C controller embedded in STM32F4xx SoC.
It enables I2C transfer in interrupt mode with Standard-mode and Fast-mode bus
speed.
Changes since v6:
- Add commit message for the patches in defconfig, .dtsi and .dts files (Alex)
- Order I2C instance base address in .dtsi file (Alex)
- Add commit message for the patch in stm32429i-eval.dts (Alex)
- Add link to the STM32F4 Soc ref manual where I2C device is described (Uwe)
- Use more usal way to define constants with several lines (Uwe)
- Remove rate variable from stm32f4_i2c_timings as it is not used (Uwe)
- Remove irq variable from stm32f4_i2c_dev struct are they are only needed
during probe (Uwe)
- Add comment from datasheet to explain stm32f4_i2c_timings values (Uwe)
- Rework i2c soft_reset implementation (Uwe)
- Replace "it" by "irq" as it is a more usual abbreviation for interrupt (Uwe)
- Add comment from datasheet to explain periph clk freq calculation (Uwe)
- Use DIV_ROUND_UP instead of plain division when required (Uwe)
- Add comment from datasheet to explain timing rise calculation (Uwe)
- Rework timing rise calculation by using shorter computation (Uwe)
- Remove (u8) cast when reading I2C data register (Uwe)
- Rework isr_event routine to handle several events during one call of the
routine (Uwe)
- Precise which type of irq is failed when a irq request error occurs (Uwe)
- Use devm_request_irq() instead of devm_request_threaded_irq() to avoid
spurious evt irq when clearing status registers in threaded context
M'boumba Cedric Madianga (5):
dt-bindings: Document the STM32 I2C bindings
i2c: Add STM32F4 I2C driver
ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
ARM: dts: stm32: Add I2C1 support for STM32429 eval board
ARM: configs: stm32: Add I2C support for STM32 defconfig
.../devicetree/bindings/i2c/i2c-stm32.txt | 33 +
arch/arm/boot/dts/stm32429i-eval.dts | 6 +
arch/arm/boot/dts/stm32f429.dtsi | 23 +
arch/arm/configs/stm32_defconfig | 3 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-stm32f4.c | 896 +++++++++++++++++++++
7 files changed, 972 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-stm32.txt
create mode 100644 drivers/i2c/busses/i2c-stm32f4.c
--
1.9.1
