| From: |
| Pantelis Antoniou <pantelis.antoniou-AT-konsulko.com> |
| To: |
| Lee Jones <lee.jones-AT-linaro.org> |
| Subject: |
| [PATCH 00/10] Introduce Juniper SAM FPGA driver |
| Date: |
| Fri, 7 Oct 2016 18:18:28 +0300 |
| Message-ID: |
| <1475853518-22264-1-git-send-email-pantelis.antoniou@konsulko.com> |
| Cc: |
| Linus Walleij <linus.walleij-AT-linaro.org>, Alexandre Courbot <gnurou-AT-gmail.com>, Rob Herring <robh+dt-AT-kernel.org>, Mark Rutland <mark.rutland-AT-arm.com>, Frank Rowand <frowand.list-AT-gmail.com>, Wolfram Sang <wsa-AT-the-dreams.de>, David Woodhouse <dwmw2-AT-infradead.org>, Brian Norris <computersforpeace-AT-gmail.com>, Florian Fainelli <f.fainelli-AT-gmail.com>, Wim Van Sebroeck <wim-AT-iguana.be>, Peter Rosin <peda-AT-axentia.se>, Debjit Ghosh <dghosh-AT-juniper.net>, Georgi Vlaev <gvlaev-AT-juniper.net>, Guenter Roeck <linux-AT-roeck-us.net>, Maryam Seraj <mseraj-AT-juniper.net>, Pantelis Antoniou <pantelis.antoniou-AT-konsulko.com>, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-gpio-AT-vger.kernel.org, linux-i2c-AT-vger.kernel.org, linux-mtd-AT-lists.infradead.org, linux-watchdog-AT-vger.kernel.org, netdev-AT-vger.kernel.org |
Add Juniper's SAM FPGA driver. Those FPGAs
are present in Juniper's PTX series of routers.
The MFD driver provices i2c/gpio/mtd/mdio devices.
There are full device tree binding documents for the
master mfd driver and for all slave drivers.
This patchset is against mainline as of today: v4.8-9431-g3477d16
and is dependent on the "Juniper prerequisites" and
"Juniper infrastructure" patchsets sent earlier.
Georgi Vlaev (6):
mfd: sam: Add documentation for the SAM FPGA
i2c: i2c-sam: Add device tree bindings
gpio: sam: Document bindings of SAM FPGA GPIO block
mtd: flash-sam: Bindings for Juniper's SAM FPGA flash
net: phy: Add MDIO driver for Juniper's SAM FPGA
net: mdio-sam: Add device tree documentation for SAM MDIO
Guenter Roeck (2):
gpio: Introduce SAM gpio driver
mtd: Add SAM Flash driver
Maryam Seraj (2):
mfd: Add Juniper SAM FPGA MFD driver
i2c: Juniper SAM I2C driver
.../devicetree/bindings/gpio/jnx,gpio-sam.txt | 110 +++
.../devicetree/bindings/i2c/i2c-sam-mux.txt | 20 +
Documentation/devicetree/bindings/i2c/i2c-sam.txt | 44 +
Documentation/devicetree/bindings/mfd/jnx-sam.txt | 94 ++
.../devicetree/bindings/mtd/flash-sam.txt | 31 +
Documentation/devicetree/bindings/net/mdio-sam.txt | 48 +
drivers/gpio/Kconfig | 11 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-sam.c | 707 +++++++++++++++
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-sam.c | 942 +++++++++++++++++++
drivers/mfd/Kconfig | 16 +
drivers/mfd/Makefile | 1 +
drivers/mfd/sam-core.c | 997 +++++++++++++++++++++
drivers/mtd/devices/Kconfig | 11 +
drivers/mtd/devices/Makefile | 1 +
drivers/mtd/devices/sam-flash.c | 642 +++++++++++++
drivers/net/phy/Kconfig | 8 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-sam.c | 564 ++++++++++++
include/linux/mfd/sam.h | 30 +
22 files changed, 4291 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/jnx,gpio-sam.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sam-mux.txt
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sam.txt
create mode 100644 Documentation/devicetree/bindings/mfd/jnx-sam.txt
create mode 100644 Documentation/devicetree/bindings/mtd/flash-sam.txt
create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt
create mode 100644 drivers/gpio/gpio-sam.c
create mode 100644 drivers/i2c/busses/i2c-sam.c
create mode 100644 drivers/mfd/sam-core.c
create mode 100644 drivers/mtd/devices/sam-flash.c
create mode 100644 drivers/net/phy/mdio-sam.c
create mode 100644 include/linux/mfd/sam.h
--
1.9.1
