| From: |
| John Crispin <john-AT-phrozen.org> |
| To: |
| "David S. Miller" <davem-AT-davemloft.net>, Andrew Lunn <andrew-AT-lunn.ch>, Florian Fainelli <f.fainelli-AT-gmail.com> |
| Subject: |
| [PATCH V3 0/3] net-next: dsa: add QCA8K support |
| Date: |
| Thu, 15 Sep 2016 16:26:38 +0200 |
| Message-ID: |
| <1473949601-20674-1-git-send-email-john@phrozen.org> |
| Cc: |
| linux-kernel-AT-vger.kernel.org, netdev-AT-vger.kernel.org, qsdk-review-AT-qca.qualcomm.com, John Crispin <john-AT-phrozen.org> |
This series is based on the AR8xxx series posted by Matthieu Olivari in may
2015. The following changes were made since then
* fixed the nitpicks from the previous review
* updated to latest API
* turned it into an mdio device
* added callbacks for fdb, bridge offloading, stp, eee, port status
* fixed several minor issues to the port setup and arp learning
* changed the namespacing as this driver to qca8k
The driver has so far only been tested on qca8337/N. It should work on other QCA
switches such as the qca8327 with minor changes.
John Crispin (3):
Documentation: devicetree: add qca8k binding
net-next: dsa: add Qualcomm tag RX/TX handler
net-next: dsa: add new driver for qca8xxx family
.../devicetree/bindings/net/dsa/qca8k.txt | 89 ++
drivers/net/dsa/Kconfig | 9 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/qca8k.c | 1060 ++++++++++++++++++++
drivers/net/dsa/qca8k.h | 185 ++++
include/net/dsa.h | 1 +
net/dsa/Kconfig | 3 +
net/dsa/Makefile | 1 +
net/dsa/dsa.c | 3 +
net/dsa/dsa_priv.h | 2 +
net/dsa/tag_qca.c | 138 +++
11 files changed, 1492 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt
create mode 100644 drivers/net/dsa/qca8k.c
create mode 100644 drivers/net/dsa/qca8k.h
create mode 100644 net/dsa/tag_qca.c
--
1.7.10.4
