| From: |
| Todor Tomov <todor.tomov-AT-linaro.org> |
| To: |
| robh+dt-AT-kernel.org, pawel.moll-AT-arm.com, mark.rutland-AT-arm.com, ijc+devicetree-AT-hellion.org.uk, galak-AT-codeaurora.org, mchehab-AT-osg.samsung.com, hverkuil-AT-xs4all.nl, geert-AT-linux-m68k.org, matrandg-AT-cisco.com, sakari.ailus-AT-iki.fi, linux-media-AT-vger.kernel.org |
| Subject: |
| [PATCH v6 0/2] OV5645 camera sensor driver |
| Date: |
| Thu, 8 Sep 2016 12:13:53 +0300 |
| Message-ID: |
| <1473326035-25228-1-git-send-email-todor.tomov@linaro.org> |
| Cc: |
| laurent.pinchart-AT-ideasonboard.com, Todor Tomov <todor.tomov-AT-linaro.org> |
This is the sixth version of the OV5645 camera sensor driver patchset.
Changes since version 5 include:
- external clock frequency set in DT;
- added v4l2_subdev_pad_ops.init_cfg function to initialize formats;
- current sensor mode not updated if set_fmt is TRY (not ACTIVE);
- other small changes - debug messages removed, register addresses defines
renamed, redundant safety checks removed, unnecessary labels removed,
mutex_destroy added.
Two one-line changes since version 4:
- return current format on set_format;
- return all frame sizes when enumerating them.
Only one change since version 3:
- build failure on kernel v4.7-rc1 fixed:
s/media_entity_init/media_entity_pads_init/
Changes from version 2 include:
- external camera clock configuration is moved from DT to driver;
- pwdn-gpios renamed to enable-gpios;
- switched polarity of reset-gpios to the more intuitive active low;
- added Kconfig dependency to OF;
- return values checks;
- regulators and gpios are now required (not optional);
- regulators names renamed;
- power counter variable changed to a bool power state;
- ov5645_registered() is removed and sensor id reading moved to probe().
Changes from version 1 include:
- patch split to dt binding doc patch and driver patch;
- changes in power on/off logic - s_power is now not called on
open/close;
- using assigned-clock-rates in dt for setting camera external
clock rate;
- correct api for gpio handling;
- return values checks;
- style fixes.
Todor Tomov (2):
media: i2c/ov5645: add the device tree binding document
media: Add a driver for the ov5645 camera sensor.
.../devicetree/bindings/media/i2c/ov5645.txt | 52 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov5645.c | 1372 ++++++++++++++++++++
4 files changed, 1437 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt
create mode 100644 drivers/media/i2c/ov5645.c
--
1.9.1
