| From: |
| Nick Dyer <nick@shmanahar.org> |
| To: |
| Dmitry Torokhov <dmitry.torokhov@gmail.com>, Hans Verkuil <hverkuil@xs4all.nl> |
| Subject: |
| [PATCH v7 0/11] Output raw touch data via V4L2 |
| Date: |
| Fri, 8 Jul 2016 12:25:53 +0100 |
| Message-ID: |
| <1467977164-17551-1-git-send-email-nick@shmanahar.org> |
| Cc: |
| linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, Benjamin Tissoires <benjamin.tissoires@redhat.com>, Benson Leung <bleung@chromium.org>, Alan Bowens <Alan.Bowens@atmel.com>, Javier Martinez Canillas <javier@osg.samsung.com>, Chris Healy <cphealy@gmail.com>, Henrik Rydberg <rydberg@bitmath.org>, Andrew Duggan <aduggan@synaptics.com>, James Chen <james.chen@emc.com.tw>, Dudley Du <dudl@cypress.com>, Andrew de los Reyes <adlr@chromium.org>, sheckylin@chromium.org, Peter Hutterer <peter.hutterer@who-t.net>, Florian Echtler <floe@butterbrot.org>, mchehab@osg.samsung.com, jon.older@itdev.co.uk, nick.dyer@itdev.co.uk |
| Archive‑link: | |
Article |
This is a series of patches to add output of raw touch diagnostic data via V4L2
to the Atmel maXTouch and Synaptics RMI4 drivers.
It's a rewrite of the previous implementation which output via debugfs: it now
uses a V4L2 device in a similar way to the sur40 driver.
We have a utility which can read the data and display it in a useful format:
https://github.com/ndyer/heatmap/commits/heatmap-v4l
These patches are also available from
https://github.com/ndyer/linux/commits/v4l-touch-v7-2016-...
I will also send a patch to update v4l2-compliance.
Changes in v7:
- Tested by Andrew Duggan and Chris Healy.
- Update bus_info to add "rmi4:" bus.
- Fix code style issues in sur40 changes.
Changes in v6:
- Remove BUF_TYPE_TOUCH_CAPTURE, as discussed with Hans V touch devices will
use BUF_TYPE_VIDEO_CAPTURE.
- Touch devices should now register CAP_VIDEO_CAPTURE: CAP_TOUCH just says that
this is a touch device, not a video device, but otherwise it acts the same.
- Add some code to v4l_s_fmt() to set sensible default values for fields not
used by touch.
- Improve naming/doc of RMI4 F54 report types.
- Various minor DocBook fixes, and split to separate patch.
- Update my email address.
- Rework sur40 changes so that PIX_FMT_GREY is supported for backward
compatibility. Florian is it possible for you to test?
Changes in v5 (Hans Verkuil review):
- Update v4l2-core:
- Add VFL_TYPE_TOUCH, V4L2_BUF_TYPE_TOUCH_CAPTURE and V4L2_CAP_TOUCH
- Change V4L2_INPUT_TYPE_TOUCH_SENSOR to V4L2_INPUT_TYPE_TOUCH
- Improve DocBook documentation
- Add FMT definitions for touch data
- Note this will need the latest version of the heatmap util
- Synaptics RMI4 driver:
- Remove some less important non full frame report types
- Switch report type names to const char * array
- Move a static array to inside context struct
- Split sur40 changes to a separate commit
Changes in v4:
- Address nits from the input side in atmel_mxt_ts patches (Dmitry Torokhov)
- Add Synaptics RMI4 F54 support patch
Changes in v3:
- Address V4L2 review comments from Hans Verkuil
- Run v4l-compliance and fix all issues - needs minor patch here:
https://github.com/ndyer/v4l-utils/commit/cf50469773f
Changes in v2:
- Split pixfmt changes into separate commit and add DocBook
- Introduce VFL_TYPE_TOUCH_SENSOR and /dev/v4l-touch
- Remove "single node" support for now, it may be better to treat it as
metadata later
- Explicitly set VFL_DIR_RX
- Fix Kconfig
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
