|
|
Log in / Subscribe / Register

mtd: spi-nor: add driver for Atmel QSPI controller

From:  Cyrille Pitchen <cyrille.pitchen@atmel.com>
To:  <computersforpeace@gmail.com>, <linux-mtd@lists.infradead.org>
Subject:  [PATCH 0/2] mtd: spi-nor: add driver for Atmel QSPI controller
Date:  Mon, 23 May 2016 18:17:19 +0200
Message-ID:  <cover.1464019059.git.cyrille.pitchen@atmel.com>
Cc:  <nicolas.ferre@atmel.com>, <boris.brezillon@free-electrons.com>, <marex@denx.de>, <linux-kernel@vger.kernel.org>, Cyrille Pitchen <cyrille.pitchen@atmel.com>
Archive‑link:  Article

Hi all,

this series of patches add support to the Atmel QSPI controller.
It was tested on a sama5d2 xplained board + Macronix mx25l25673g QSPI
memory.

The series is based on Michal and Brian series:
"[PATCH v7 00/10] Add error checking to spi-nor read and write"

Best regards,

Cyrille

Cyrille Pitchen (2):
  Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  mtd: atmel-quadspi: add driver for Atmel QSPI controller

 .../devicetree/bindings/mtd/atmel-quadspi.txt      |  32 +
 drivers/mtd/spi-nor/Kconfig                        |   9 +
 drivers/mtd/spi-nor/Makefile                       |   1 +
 drivers/mtd/spi-nor/atmel-quadspi.c                | 741 +++++++++++++++++++++
 4 files changed, 783 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
 create mode 100644 drivers/mtd/spi-nor/atmel-quadspi.c

-- 
1.8.2.2



Copyright © 2016, Eklektix, Inc.
Comments and public postings are copyrighted by their creators.
Linux is a registered trademark of Linus Torvalds