| From: |
| Maxime Ripard <maxime.ripard@free-electrons.com> |
| To: |
| Linus Walleij <linus.walleij@linaro.org>, Alexandre Courbot <gnurou@gmail.com>, Lee Jones <lee.jones@linaro.org>, Chen-Yu Tsai <wens@csie.org> |
| Subject: |
| [PATCH 0/4] Add AXP209 GPIO driver |
| Date: |
| Wed, 9 Mar 2016 11:50:10 +0100 |
| Message-ID: |
| <1457520614-32239-1-git-send-email-maxime.ripard@free-electrons.com> |
| Cc: |
| devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Hans de Goede <hdegoede@redhat.com>, Maxime Ripard <maxime.ripard@free-electrons.com> |
| Archive‑link: | |
Article |
Hi,
The axp209 PMIC used in combination to some Allwinner SoCs has a bunch
of GPIOs accessible. Some boards use these to control their backlight
or a few LEDs.
There's supposed to be 4 of them, but the fourth one has a different
configuration register scheme, and I couldn't find any board that was
using this GPIO. It will be probably be supported eventually, but
until then, we support only the first 3 GPIOs.
Let me know what you think,
Maxime
Maxime Ripard (4):
gpio: Add AXP209 GPIO driver
mfd: axp20x: Add AXP209 GPIO driver to the mfd
ARM: dt: axp209: Add AXP209 GPIO driver
ARM: sun5i: chip: Add status LED
.../devicetree/bindings/gpio/gpio-axp209.txt | 30 ++++
arch/arm/boot/dts/axp209.dtsi | 6 +
arch/arm/boot/dts/sun5i-r8-chip.dts | 10 ++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-axp209.c | 166 +++++++++++++++++++++
drivers/mfd/axp20x.c | 3 +
7 files changed, 222 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 drivers/gpio/gpio-axp209.c
--
2.7.2
