| From: |
| Enric Balletbo i Serra <enric.balletbo@collabora.com> |
| To: |
| devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Sebastian Reichel <sre@kernel.org> |
| Subject: |
| [PATCHv2 0/2] Add UCS1002 USB Port Power Controller |
| Date: |
| Thu, 18 Feb 2016 10:52:49 +0100 |
| Message-ID: |
| <1455789171-5093-1-git-send-email-enric.balletbo@collabora.com> |
| Cc: |
| Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Kumar Gala <galak@codeaurora.org>, Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>, David Woodhouse <dwmw2@infradead.org>, Sjoerd Simons <sjoerd.simons@collabora.co.uk>, Martyn Welch <martyn.welch@collabora.com> |
| Archive‑link: | |
Article |
Dear all,
This is the second version of the UCS1002 driver, a Programmable USB Port
Power Controller with Charger Emulation.
Any comments are welcome. Thanks in advance.
Enric Balletbo i Serra (2):
devicetree: Add UCS1002 USB Port Power Controller binding
power: ucs1002: Add support for Programmable USB Port Power Controller
.../devicetree/bindings/power/ucs1002.txt | 41 +
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/ucs1002_power.c | 1004 ++++++++++++++++++++
4 files changed, 1053 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/ucs1002.txt
create mode 100644 drivers/power/ucs1002_power.c
--
2.1.0
