| From: |
| Stefan Wahren <stefan.wahren@i2se.com> |
| To: |
| Richard Purdie <rpurdie@rpsys.net>, Jacek Anaszewski <j.anaszewski@samsung.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> |
| Subject: |
| [PATCH RFC 0/3] leds: add SN3218 LED driver |
| Date: |
| Thu, 28 Jan 2016 20:41:04 +0000 |
| Message-ID: |
| <1454013667-25889-1-git-send-email-stefan.wahren@i2se.com> |
| Cc: |
| devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, Stefan Wahren <stefan.wahren@i2se.com> |
| Archive‑link: | |
Article |
This patch series implements support for the Si-En SN3218
18 Channel LED Driver through I2C. This implemention only write
data over I2C und get the platform data via DT.
The driver has been tested on a Raspberry Pi B.
Stefan Wahren (3):
of: Add vendor prefix for Si-En Technology
DT: add binding for SN3218 LED driver
leds: add SN3218 LED driver
.../devicetree/bindings/leds/leds-sn3218.txt | 41 ++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-sn3218.c | 254 ++++++++++++++++++++
5 files changed, 305 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-sn3218.txt
create mode 100644 drivers/leds/leds-sn3218.c
--
1.7.9.5
