| From: |
| Alex Smith <alex.smith@imgtec.com> |
| To: |
| <linux-mtd@lists.infradead.org> |
| Subject: |
| [PATCH v5 0/4] mtd: nand: jz4780: Add NAND and BCH drivers |
| Date: |
| Tue, 8 Sep 2015 10:10:49 +0100 |
| Message-ID: |
| <1441703453-2838-1-git-send-email-alex.smith@imgtec.com> |
| Cc: |
| Alex Smith <alex@alex-smith.me.uk>, Alex Smith <alex.smith@imgtec.com>, Brian Norris <computersforpeace@gmail.com>, David Woodhouse <dwmw2@infradead.org>, Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-mips@linux-mips.org> |
| Archive‑link: | |
Article |
Hi,
This series adds support for the BCH controller and NAND devices on
the Ingenic JZ4780 SoC.
Tested on the MIPS Creator Ci20 board. All dependencies are now in
mainline.
This version of the series is based on current mainline (pre 4.3-rc1).
Review and feedback welcome.
Thanks,
Alex
Alex Smith (4):
mtd: nand: increase ready wait timeout and report timeouts
dt-bindings: binding for jz4780-{nand,bch}
mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodes
.../bindings/mtd/ingenic,jz4780-nand.txt | 57 ++++
arch/mips/boot/dts/ingenic/ci20.dts | 51 +++
arch/mips/boot/dts/ingenic/jz4780.dtsi | 26 ++
drivers/mtd/nand/Kconfig | 7 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/jz4780_bch.c | 348 +++++++++++++++++++
drivers/mtd/nand/jz4780_bch.h | 42 +++
drivers/mtd/nand/jz4780_nand.c | 378 +++++++++++++++++++++
drivers/mtd/nand/nand_base.c | 14 +-
9 files changed, 921 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
create mode 100644 drivers/mtd/nand/jz4780_bch.c
create mode 100644 drivers/mtd/nand/jz4780_bch.h
create mode 100644 drivers/mtd/nand/jz4780_nand.c
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
