| From: |
| Georgi Djakov <gdjakov@mm-sol.com> |
| To: |
| mturquette@linaro.org, linux@arm.linux.org.uk, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, sboyd@codeaurora.org, rdunlap@infradead.org |
| Subject: |
| [PATCH v2 0/4] clk: qcom: Add APQ8084 Global Clock Controller support |
| Date: |
| Sat, 31 May 2014 18:45:30 +0300 |
| Message-ID: |
| <1401551134-28485-1-git-send-email-gdjakov@mm-sol.com> |
| Cc: |
| linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Georgi Djakov <gdjakov@mm-sol.com> |
| Archive‑link: | |
Article |
This patchset adds support for the global clock controller found on the
APQ8084 based platforms.
Patches 1,2 can go through clk-next and 3,4 through arm-soc.
Changes from v1:
- Moved APQ8084 clocks into a separate file and under separate Kconfig
entry. Dropped the override function patch from v1.
- Added the missing information about resets (suggested by Kumar Gala).
- Made the UART DT node "disabled" in dtsi and "okay" in dts (suggested
by Kumar Gala)
Georgi Djakov (4):
clk: qcom: Add APQ8084 Global Clock Controller documentation
clk: qcom: Add APQ8084 Global Clock Controller support
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
ARM: dts: qcom: Add APQ8084 serial port DT node
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
arch/arm/boot/dts/qcom-apq8084-mtp.dts | 6 +
arch/arm/boot/dts/qcom-apq8084.dtsi | 18 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-apq8084.c | 2951 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 337 +++
include/dt-bindings/reset/qcom,gcc-apq8084.h | 116 +
8 files changed, 3438 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-apq8084.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-apq8084.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-apq8084.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
