|
|
Log in / Subscribe / Register

ax88179_178a: Add support for AX88179A-based chips

From:  Birger Koblitz <mail-AT-birger-koblitz.de>
To:  Andrew Lunn <andrew+netdev-AT-lunn.ch>, "David S. Miller" <davem-AT-davemloft.net>, Eric Dumazet <edumazet-AT-google.com>, Jakub Kicinski <kuba-AT-kernel.org>, Paolo Abeni <pabeni-AT-redhat.com>
Subject:  [PATCH 0/9] ax88179_178a: Add support for AX88179A-based chips
Date:  Wed, 01 Jul 2026 07:42:46 +0200
Message-ID:  <20260701-ax88179a-v1-0-13685df67515@birger-koblitz.de>
Cc:  linux-usb-AT-vger.kernel.org, netdev-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, Birger Koblitz <mail-AT-birger-koblitz.de>
Archive-link:  Article

This adds support for the current generation of ASIX network adapter chips,
which are based on the AX88179A. This includes the AX88179A/B (1GBit-PHY),
AX88772D/E (100MBit) and AX88279 (2.5GBit).

The AX179A-based chips all provide both a CDC-NCM compatible USB interface,
and a proprietary vendor interface with more features. By default, the
proprietary vendor interface is not active and Linux will load the CDC-NCM
driver to support the devices. If the ax88179_178a module is configured by
the OS to have precedence over CDC-NCM, then this driver will switch the
device to use the vendor interface, and the device will be controlled by
the ax88179_178a driver when the device is probed again after an automatic
reset of the device bringing up the vendor interface.

The following hardware was tested:
Delock 66046 2.5GBit adapter (AX88279, FW: 1.2.0.0)
TP-Link UE306 1GBit adapter (AX88179B, FW: 1.3.0.0)
Renkforce RF-4708614 1GBit adapter (AX88179A, FW: 1.0.4.0)
UGREEN CR110 100MBit adapter (AX88722E, FW: 1.3.0.0)

The driver supports the following features
- EEE
- TCP segmentation offload
- VLAN filtering/tagging offload 
  (NETIF_F_HW_VLAN_CTAG_FILTER, NETIF_F_HW_VLAN_CTAG_RX/TX)
- RX/TX checksum offload
- FC/Pause configuration
- EEPROM read access

The code is based on the ASIX 4.1.0 out-of-tree driver published under
the GPL,, the aqc111 driver which provides support for the AX88279A,
and some tracing of USB-transfers of the Windows-driver.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
---
Birger Koblitz (9):
      ax88179_178a: Fix endianness of pause watermark register
      ax88179_178a: Add HW support for AX179A-based chips
      ax88179_178a: Add support for AX88179A MMD access
      ax88179_178a: Obtain speed and duplex from Interrupt URB
      ax88179_178a: Add support for ethtool pause parameter configuration
      ax88179_178a: Add VLAN offload support for AX88179A
      ax88179_178a: Add ethtool get_drvinfo
      ax88179_178a: Add support for AX88179A/772D/279 EEPROM access
      ax88179_178a: Add AX179A/AX279 multicast configuration

 drivers/net/usb/ax88179_178a.c | 1459 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 1316 insertions(+), 143 deletions(-)
---
base-commit: 805185b7c7a1069e407b6f7b3bc98e44d415f484
change-id: 20260630-ax88179a-a1d89fe21730

Best regards,
-- 
Birger Koblitz <mail@birger-koblitz.de>




Copyright © 2026, Eklektix, Inc.
Comments and public postings are copyrighted by their creators.
Linux is a registered trademark of Linus Torvalds