| From: |
| Wenmeng Liu <wenmeng.liu-AT-oss.qualcomm.com> |
| To: |
| Mauro Carvalho Chehab <mchehab-AT-kernel.org>, Rob Herring <robh-AT-kernel.org>, Krzysztof Kozlowski <krzk+dt-AT-kernel.org>, Conor Dooley <conor+dt-AT-kernel.org>, Sakari Ailus <sakari.ailus-AT-linux.intel.com> |
| Subject: |
| [PATCH 0/2] media: i2c: Add OmniVision OG0VA1B camera sensor driver |
| Date: |
| Thu, 18 Jun 2026 18:37:42 +0800 |
| Message-ID: |
| <20260618-og0va1b-v1-0-dda71bb83009@oss.qualcomm.com> |
| Cc: |
| linux-media-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, Wenmeng Liu <wenmeng.liu-AT-oss.qualcomm.com> |
| Archive-link: |
| Article |
Add OmniVision OG0VA1B driver support. The OmniVision OG0VA1B is a
1/10-inch monochrome CMOS VGA image sensor. It outputs 10-bit raw (Y10)
frames at up to 640x480 resolution over a single-lane MIPI CSI-2
interface and is controlled via an I2C-compatible SCCB bus.
This driver has been verified on the Purwa EVK.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
---
Wenmeng Liu (2):
dt-bindings: media: i2c: Add OmniVision OG0VA1B
media: i2c: og0va1b: Add OmniVision OG0VA1B camera sensor
.../bindings/media/i2c/ovti,og0va1b.yaml | 104 +++
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 10 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/og0va1b.c | 867 +++++++++++++++++++++
5 files changed, 989 insertions(+)
---
base-commit: 4fa3f5fabb30bf00d7475d5a33459ea83d639bf9
change-id: 20260618-og0va1b-55bbf3cabb0e
Best regards,
--
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
